Project "BlackOut" 89 convert.

ryan218 · Oct 13, 2008

riceslayer302 said:
your gonna spend money to build a 331 stroker and then put a stock cam in it???

yeah maybe. i cant go with a nice cam like id like because of my old man. so it would have to be such a mild cam that i mise well leave the stock HO cam in it for now and swap put to more aggressive cam after i do a 5 speed swap.

stykthyn · Oct 13, 2008

WTF, how is your old man keeping you from putting in a cam?
like he's not going to notice a stroker kit going in, but the moment you upgrade the cam he's gonna crap his pants?
Put in whatever cam you want and let him cry about it later. what's he going to do, take away your car?

25thmustang · Oct 13, 2008

I agree the money for a custom grind is well worth it...

MAC'n89Blckstng · Oct 13, 2008

Do what I did when my dad didn't want me to put a cam in my motor, leave it hidden, strip down the block and throw in the different cam when you assemble the motor. Whats his reasoning for not wanting you to put a different cam in. Plus its gonna suck more to tear it all back down to put a cam in it later. And 300 hp is gonna be hard to get with GT40ps and a stock cam I think, 270-285 maybe.

Beasty306GT · Oct 13, 2008

sneak a cam in....save ur self a teardown

5.0Droptop · Oct 13, 2008

new Exh sounds nice Ryan.

ryan218 · Oct 13, 2008

we will see. idk what iw ant to do. half is saying..just do the built 331. the other is saying be smart about it. sell the stroker kit. build a mild 306. and call it a day. it would be plenty to get me into some trouble. idk yet.

ryan218 · Oct 13, 2008

5.0Droptop said:
new Exh sounds nice Ryan.

got a few leaks i need to button up then ill get some more vids. itss till running fine. which makes me wonder if it could be bad exhaust valve.... and thats what it lost so much oil through the motor so quick.

ryan218 · Nov 6, 2008

5 lugging it.

ryan218 · Nov 8, 2008

its a whole new rear end with ford racing 3.73's that. put the 5 lug axles in. very simple to do. pulled the brake lines off new rear end becasue they were pinched. swaping everything over.
paid 100 bucks for ranger axles. perfect shape. brand new drums. and 2 brand new 235/50/17 tires.

teaser pics

Beasty306GT · Nov 9, 2008

You gonna piant the rearend before u install it??

ryan218 · Nov 10, 2008

^ yeah i am going to slicksix. just finished cleaning up the underside of car... i was cleaning it and im still happy. i have found NO RUST ANYWHERE on this car. the torque boxes are perfect. im going to have a guy i know enforce them sometime soon. wish i could do it now but the welder is at his shop so no can do lol.

well i need to track down some new lower controlling arm bolts. went to napa..nothing..ford. guy didnt even know what i was talking about with "lower controlling arm hardware" dumb people..lol.

any idea where i can look? i was thinking hardware store. on the bolt it says 10.9..but these are metric? so as long as i get a 8 up grade bolt then i would be fine right?

so in mean time i cleaned it up some...

added the fulid/friction modifer and got the diff cover on. now if i could find my 11MM open end wrench i would put the brake lines on the new rear end but it missing in action at the moment.

i want to drive it so bad. it sucks..FULL tank of gas. ( from when gas was 3.99 ) still sitting in it. i haven't even got to go out and waste gas..and right now i can afford to. only thing holding me back is tags, registration, insurance..and my bowl **** ticket. thats really pissing me off. this sucks. i want to see the 3.73's how much of a difference they make!!!

ill just have to do a burnout in the garage or something haha.

LaserSVT · Nov 10, 2008

If you really wana burn gas then just start her up and rev her in the garrage
As for the hardware, most NAPAs around here have a large bolt/nut bin with grade 8 and better stuff in it. Just bring a good bolt for comparison and have at it. Could also try a salvage yard. Or call MM or Steeda, mabey they can point you in the right direction

ryan218 · Nov 10, 2008

LaserSVT said:
If you really wana burn gas then just start her up and rev her in the garrage
As for the hardware, most NAPAs around here have a large bolt/nut bin with grade 8 and better stuff in it. Just bring a good bolt for comparison and have at it. Could also try a salvage yard. Or call MM or Steeda, mabey they can point you in the right direction

i start it and let it run a few mins each week...thats the extent of my car excitement

already tried napa..nothing big enough.

Beasty306GT · Nov 10, 2008

79-98 HARDWARE KIT, LOWER CONTROL ARM MUSTANG

yeah u hear ya..i got brand new 373 gears and rebuild kit i been looking at for 6 months..i couldnt find anyone i trust to do the gear swap yet....dont forget to change ur speedo gear in the tranny

or you could go to home depot and match a bolt up with one that u have

ryan218 · Nov 10, 2008

SickSix said:
79-98 HARDWARE KIT, LOWER CONTROL ARM MUSTANG

yeah u hear ya..i got brand new 373 gears and rebuild kit i been looking at for 6 months..i couldnt find anyone i trust to do the gear swap yet....dont forget to change ur speedo gear in the tranny

or you could go to home depot and match a bolt up with one that u have

thats alot for 4 bolts lol. im going to depo later to try and find somwthing. i want to get it done so the old man will shut up.

andyeah...still gotta to to ford and get one. gotta figure out what tooth i need.

Beasty306GT · Nov 10, 2008

GEAR, SPEEDOMETER, 21 TOOTH, AOD, PURPLE MUSTANG

ryan218 · Nov 10, 2008

thanks. one problem after another. i need to bend or find new break lines. and also that idk what to call it. juntion for the 2 lines into 1. need that to god damnit. so if anyone has these..pm me.

till then. some damn pics.

95BlueStallion · Nov 10, 2008

Looks good man. Did I miss pics of the front spindle swap, or did you just skip over that?

Edit: You have a whole 'nother thread about that... Im just gonna go crawl under a rock now.

ryan218 · Nov 10, 2008

95BlueStallion said:
Looks good man. Did I miss pics of the front spindle swap, or did you just skip over that?

Edit: You have a whole 'nother thread about that... Im just gonna go crawl under a rock now.

its ok man. i just did mark Vii rotors up front for now. imma wait till my firend totales her 2001 GT....again its only a matter of time and steal the front of it.

imma have lynn merge the threads soon for me

Project "BlackOut" 89 convert.

In just 10 years, I'll be old enough to drive!!!!

I want to measure mine. It doesn't look that tall.

Mustang Master

Active Member

Active Member

...all those nights we shared, and you're a dude??

In just 10 years, I'll be old enough to drive!!!!

In just 10 years, I'll be old enough to drive!!!!

In just 10 years, I'll be old enough to drive!!!!

Attachments

In just 10 years, I'll be old enough to drive!!!!

Attachments

Active Member

In just 10 years, I'll be old enough to drive!!!!

Attachments

Got FB banned again for saying nards

In just 10 years, I'll be old enough to drive!!!!

Active Member

In just 10 years, I'll be old enough to drive!!!!

Active Member

In just 10 years, I'll be old enough to drive!!!!

Attachments

My assy trans to myself

In just 10 years, I'll be old enough to drive!!!!

Similar threads

Privacy & Transparency

Privacy & Transparency