Properly aligning head lights and installing turn signals

the headlights have 3 "prongs" (or whatever you wanna call them) that go into the headlight panel--two on the outside and one on the inside, closest to the center opening. i've found the easiest way to adjust them is w/ a phillips screwdriver on the outside-bottom one--remove the parking lamp to reveal the screw. tightening the screw points them lower, loosening it points them higher.

you can also remove the headlight and turn the black thing that's on the long screw by hand--a lot quicker, hehe.

about the parking lights--there should be one nut/bolt that fastens it to the panel. this article ( http://mustangworld.com/ourpics/fcar/clear.htm ) should help.