• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Puked oil under boost

  • Thread starter Thread starter Cobra_Dusten
  • Start date Start date Aug 18, 2005

Cobra_Dusten

Member
Aug 7, 2005
246
0
16
Marysville, Wa
Aug 18, 2005
#1
  • Aug 18, 2005
  • #1
Car is in the signature. I just picked it up yesterday, and my a-hole cousin took it for a run this AM. I have been pretty easy, but he wooded the car like there was no tomorrow. It started puking oil out of the valve cover, i assume to much Crank case pressure. Anyone run into this, and what can i check out?
 

SQUEEZE&STROKE

New Member
Jun 24, 2005
0
0
0
SOUTHERN CA
Aug 18, 2005
#2
  • Aug 18, 2005
  • #2
Could be just a bad gasket but it does sound like crankcase pressure. You could try ordinary breathers or even a vacuum pump, I plan on putting a vacuum pump on my car soon
 
D

db1994

New Member
Nov 17, 2004
52
0
0
Lake Worth, FL
Aug 18, 2005
#3
  • Aug 18, 2005
  • #3
Make sure your PCV valve is still good. You might have just been blowing boost into the crankcase if its broke.

-Jason
 

Cobra_Dusten

Member
Aug 7, 2005
246
0
16
Marysville, Wa
Aug 18, 2005
#4
  • Aug 18, 2005
  • #4
the pcv valve had come out of the manifold, and a small rubber hose on the wastegate was unhooked, i hooked it back up, and put the pcv valve back in
 
D

db1994

New Member
Nov 17, 2004
52
0
0
Lake Worth, FL
Aug 18, 2005
#5
  • Aug 18, 2005
  • #5
Sounds like the valve was/is bad if it blew it out of the manifold instead of just blowing air through the valve. Then again depending on where the other end of the hose goes with the Kenne Bell, it might not have opened because there was boost pressure pushing against the other side. I dont know exacly where the kenne bell runs the PCV line to.


-Jason
 

Cobra_Dusten

Member
Aug 7, 2005
246
0
16
Marysville, Wa
Aug 18, 2005
#6
  • Aug 18, 2005
  • #6
the pic is a bit blurry, but you get the point
http://community.webshots.com/photo/417525447/426634950Nmkorg
 

SQUEEZE&STROKE

New Member
Jun 24, 2005
0
0
0
SOUTHERN CA
Aug 18, 2005
#7
  • Aug 18, 2005
  • #7
YOU STILL HAVE A STOCK THROTTLE BODY ON A S/C CAR?????? Get a much bigger one so you can all over other cars!
 

shttygtstang

New Member
Jun 2, 2004
978
0
0
Aug 18, 2005
#8
  • Aug 18, 2005
  • #8
your sending postive pressure into the crankcase wich is a nono. ihad this problem you corect it by putting air breathers on your valve covers... do a search on this if not here then in 5.0 tech
 

Cobra_Dusten

Member
Aug 7, 2005
246
0
16
Marysville, Wa
Aug 19, 2005
#9
  • Aug 19, 2005
  • #9
SQUEEZE&STROKE said:
YOU STILL HAVE A STOCK THROTTLE BODY ON A S/C CAR?????? Get a much bigger one so you can all over other cars!
Click to expand...

ummm.... i just bought the car yesterday, i am not running anything on it...
as far as breathers, do you mean something like this?
http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=2164&prmenbr=361
 

Cobra_Dusten

Member
Aug 7, 2005
246
0
16
Marysville, Wa
Aug 19, 2005
#10
  • Aug 19, 2005
  • #10
well, i did some reading, looks like i need to go get one tomorrow. Also, the steel plug, mine popped out with the pcv the first time, where the f does it go? This is my first fuelie 5.0, i've been driving diesel way to tlong
 
W

wytstang

Mustang Master
Mar 14, 2004
4,988
4
78
Summerville,SC missing South Fl. weather :(
Aug 19, 2005
#11
  • Aug 19, 2005
  • #11
Steel plug???Do you mean the metal screen that goes under the PVC rubber gromet.
 
You must log in or register to reply here.

Similar threads

A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
B
Leaking top of intake
  • Bertan
  • Jan 1, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
414
1965 - 1973 Classic Mustangs -General/Talk- Jan 17, 2026
manicmechanic007
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
654
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
J
Emission problems
  • jls.zmmr
  • Feb 5, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
331
1994 - 1995 Specific Tech Feb 7, 2026
AeroCoupe
O
Sooty/Oily Front Engine & Pulleys
  • ozenator
  • Jun 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
490
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 22, 2026
Blackhawkxx
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?