Puked oil under boost

[Cobra_Dusten]

Car is in the signature. I just picked it up yesterday, and my a-hole cousin took it for a run this AM. I have been pretty easy, but he wooded the car like there was no tomorrow. It started puking oil out of the valve cover, i assume to much Crank case pressure. Anyone run into this, and what can i check out?

 

[SQUEEZE&STROKE]

Could be just a bad gasket but it does sound like crankcase pressure. You could try ordinary breathers or even a vacuum pump, I plan on putting a vacuum pump on my car soon

 

[db1994]

Make sure your PCV valve is still good. You might have just been blowing boost into the crankcase if its broke.

-Jason

 

[Cobra_Dusten]

the pcv valve had come out of the manifold, and a small rubber hose on the wastegate was unhooked, i hooked it back up, and put the pcv valve back in

 

[db1994]

Sounds like the valve was/is bad if it blew it out of the manifold instead of just blowing air through the valve. Then again depending on where the other end of the hose goes with the Kenne Bell, it might not have opened because there was boost pressure pushing against the other side. I dont know exacly where the kenne bell runs the PCV line to.


-Jason

 

[Cobra_Dusten]

the pic is a bit blurry, but you get the point
http://community.webshots.com/photo/417525447/426634950Nmkorg

 

[SQUEEZE&STROKE]

YOU STILL HAVE A STOCK THROTTLE BODY ON A S/C CAR?????? Get a much bigger one so you can all over other cars!

 

[shttygtstang]

your sending postive pressure into the crankcase wich is a nono. ihad this problem you corect it by putting air breathers on your valve covers... do a search on this if not here then in 5.0 tech

 

[Cobra_Dusten]

YOU STILL HAVE A STOCK THROTTLE BODY ON A S/C CAR?????? Get a much bigger one so you can all over other cars!

ummm.... i just bought the car yesterday, i am not running anything on it...
as far as breathers, do you mean something like this?
http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=2164&prmenbr=361

 

[Cobra_Dusten]

well, i did some reading, looks like i need to go get one tomorrow. Also, the steel plug, mine popped out with the pcv the first time, where the f does it go? This is my first fuelie 5.0, i've been driving diesel way to tlong

 

[wytstang]

Steel plug???Do you mean the metal screen that goes under the PVC rubber gromet.