i want to pull the motor from my 94 gt it all stock and i want to keep the tranny (5spd)on it and take it off when i pull the motor out but the question is will there be enough room for the tranny and motor to com out wit the front of the engine bay being smaller than a fox body mustang!!!!!
That's how I removed my stock 302. All I did was remove the accessory brackets. I left the radiator, but it would be a lot easier if you did remove it. I put the back end up on jackstands so that the car was tilting forward and then with a friend, just yanked her out with the tranny. I also then installed the 408 with the tranny already hooked up...it was a lot easier to assemble the drivetrain out of the car than in the car.