• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Pulling my motor & Tranny

  • Thread starter Thread starter Killer50stang
  • Start date Start date Oct 1, 2005

Killer50stang

New Member
May 11, 2004
632
0
0
Oct 1, 2005
#1
  • Oct 1, 2005
  • #1
I'm pulling my motor for the first time and then the tranny. Any tips I can get? This is actually a 2.3 and not my 5.0. I'm gonna pick up a cherry picker sometime next week. Will I need a tranny lift of somekind to drop out the tranny. I won't be putting one back in, as I'm parting this car out. I also don't have a lift. Thanks.

-Poth
 

5ohturbostang

New Member
Aug 30, 2004
69
0
0
cleveland
Oct 1, 2005
#2
  • Oct 1, 2005
  • #2
are you selling the body?i have a dart 306 block and g.e.r. performance aod i just took out of my vert becouse it was rusty need something else to stuff it in
 
J

jstang209

20+ Year Stangneter
Jun 3, 2004
640
2
18
Stockton 209
Oct 1, 2005
#3
  • Oct 1, 2005
  • #3
naw u can pull the engine and tranny as 1.. thats what i did its really easier then doing them both seperate
 
J

jstang209

20+ Year Stangneter
Jun 3, 2004
640
2
18
Stockton 209
Oct 1, 2005
#4
  • Oct 1, 2005
  • #4
u gotta damn near 400hp stang and dont even no how to pull a 4 banger out
 
M

mustangmarks

New Member
Dec 14, 2004
102
0
0
Oct 1, 2005
#5
  • Oct 1, 2005
  • #5
jstang209 said:
naw u can pull the engine and tranny as 1.. thats what i did its really easier then doing them both seperate
Click to expand...
Thats for sure
 

Killer50stang

New Member
May 11, 2004
632
0
0
Oct 1, 2005
#6
  • Oct 1, 2005
  • #6
5ohturbostang said:
are you selling the body?i have a dart 306 block and g.e.r. performance aod i just took out of my vert becouse it was rusty need something else to stuff it in
Click to expand...

Yes, the body will be for sale. It was a 4 cyl body. Pretty much stripped if you want it.

Poth
 

Killer50stang

New Member
May 11, 2004
632
0
0
Oct 1, 2005
#7
  • Oct 1, 2005
  • #7
jstang209 said:
u gotta damn near 400hp stang and dont even no how to pull a 4 banger out
Click to expand...

What's your point? The block is stock in my stang. Never pulled it or the tranny to reach the 390 I have. Why the smart remark? Anyway, what needs to be disconnected at the tranny side for the pull? Isnt' there just a few bolts on the block?
 

5ohturbostang

New Member
Aug 30, 2004
69
0
0
cleveland
Oct 4, 2005
#8
  • Oct 4, 2005
  • #8
i do want it,wheres it at?pictures?
 

Killer50stang

New Member
May 11, 2004
632
0
0
Oct 4, 2005
#9
  • Oct 4, 2005
  • #9
5ohturbostang said:
i do want it,wheres it at?pictures?
Click to expand...

The motor still needs pulled. Come over and help me pull them and I'll make you a deal.
 

5ohturbostang

New Member
Aug 30, 2004
69
0
0
cleveland
Oct 4, 2005
#10
  • Oct 4, 2005
  • #10
Killer50stang said:
The motor still needs pulled. Come over and help me pull them and I'll make you a deal.
Click to expand...
where do you live?ill have it out in 2 hours
 

jackchan

New Member
Oct 17, 2004
507
0
0
Mobile Alabama
Oct 4, 2005
#11
  • Oct 4, 2005
  • #11
underside
4 driveshaft bolts
2 crossmember bolts
2 transmission bolts
1 speedo bolt
2 shifter bolts (up top)
4 bolts on rear of h pipe
4 bolts on front of h pipe
2 engine mount nuts
up top:
throttle cable
two radiator hoses
(if auto) trans cooler
intake track /air filter
engine ground cable
main two wiring harness connectors (behind intake)
vacuum hoses from vacuum tree (3 I think)
smog tubes......if equipped
engine fan (unless electric)


basically thats it...........GET TO WORK!
 
N

niklid05

New Member
Aug 20, 2004
140
0
0
Kutztown PA 19530
Oct 4, 2005
#12
  • Oct 4, 2005
  • #12
pulling a 2.3 and tranny is as easy as picking your nose. Just pull all the wires unhook the exhaust, dont even worry about the drive shaft, just tie it up and pull the motor out. It was 5,908,604,839,712X's easier than taking out a 2.5L motor from a probe gt.
 

5ohturbostang

New Member
Aug 30, 2004
69
0
0
cleveland
Oct 4, 2005
#13
  • Oct 4, 2005
  • #13
lol ive pulled a good 30 engine/trannys in my life so far,whats one more
 

Killer50stang

New Member
May 11, 2004
632
0
0
Oct 5, 2005
#14
  • Oct 5, 2005
  • #14
5ohturbostang said:
lol ive pulled a good 30 engine/trannys in my life so far,whats one more
Click to expand...

This will be my first complete pull...
 

jackchan

New Member
Oct 17, 2004
507
0
0
Mobile Alabama
Oct 5, 2005
#15
  • Oct 5, 2005
  • #15
I've pulled so many mustang engines/transmissions I can nearly quote you the bolt sizes!
 

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
Oct 5, 2005
#16
  • Oct 5, 2005
  • #16
Where are you located?
 

Killer50stang

New Member
May 11, 2004
632
0
0
Oct 5, 2005
#17
  • Oct 5, 2005
  • #17
rd said:
Where are you located?
Click to expand...

I'm located in mansfield ohio
 

5ohturbostang

New Member
Aug 30, 2004
69
0
0
cleveland
Oct 5, 2005
#18
  • Oct 5, 2005
  • #18
i should be able to make it out there to help,i think its like an hour away,gas might kick my ass this week.well see
 
You must log in or register to reply here.

Similar threads

D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
203
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
M
Misfire
  • Mike3
  • May 30, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
145
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 30, 2026
Mike3
M
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
516
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
O
My rebirth, Hi from PA
  • onemore1987
  • Jun 28, 2026
  • The Welcome Wagon
Replies
3
Views
256
The Welcome Wagon Jun 29, 2026
onemore1987
O
C
Help with manual conversion
  • CPH89LX
  • Aug 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
703
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 27, 2026
2000xp8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?