If I get the under drive pully's can I leave the Stock alt. pully on,and just change the crank and power steering pully?
Pully's Question
- Thread starter willys1
- Start date
Mavrick
Founding Member
I think with underdrives you change the crank and waterpump, not the power steering pulley.
I have underdrive crank and waterpump pulleys, and the stock alt. pulley. At idle my car charges 14.6v. That is with no lights or accessories on.
I have underdrive crank and waterpump pulleys, and the stock alt. pulley. At idle my car charges 14.6v. That is with no lights or accessories on.
HO93LX302
Founding Member
I have the motorsport U/D pulleys on my car.. Had to take the alt pulley off cuz wasn't charging as well as i wanted it to at idle.. lights would get to dim specially with radio and heater on at the same time, not to mention all the gauges..
Mavrick
Founding Member
willys1 said:
I couldn't tell you, i didn't install the belt. Right now my car has no A/C or smog pump from the previous owner, but im putting all my emissions equipment back in when i can find all of it.
Mavrick
Founding Member
Kurt2002
New Member
Hey willys1, I also have a Auto 5.0 and I'm getting the March pulley. They have U/D for auto car so charging is not issue. Check them out http://www.marchperf.com/pg29.html there the power and amp series.
Similar threads
