urban96 bubb rubb says:"woo woooooo" Founding Member Sep 24, 2002 3,464 1 69 Syracuse, NY Jul 23, 2005 #1 Jul 23, 2005 #1 well tonight i bolted up the GT40p's, tightend two of the rockers and checked the length and it was 6 & 1/8'th anyone know where i can buy these ASAP?
well tonight i bolted up the GT40p's, tightend two of the rockers and checked the length and it was 6 & 1/8'th anyone know where i can buy these ASAP?
urban96 bubb rubb says:"woo woooooo" Founding Member Sep 24, 2002 3,464 1 69 Syracuse, NY Jul 23, 2005 #2 Jul 23, 2005 #2 actually i think im gonna shim the rockers and use the stock pushrods (heads were milled .030)
final5-0 Mustang Master Apr 6, 2003 6,817 12 79 DFW Texas Jul 23, 2005 #3 Jul 23, 2005 #3 Get you a marks a lot and paint 2 or 3 coats on the valve tip. Turn the motor over 2 or 3 times to see where the roller travel is on the valve tip. It should look about like this. Later Grady
Get you a marks a lot and paint 2 or 3 coats on the valve tip. Turn the motor over 2 or 3 times to see where the roller travel is on the valve tip. It should look about like this. Later Grady