• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

pushrods for a 347

  • Thread starter Thread starter 347lxvert
  • Start date Start date Jan 14, 2006
3

347lxvert

Member
Dec 1, 2005
135
0
16
Russellville, AR
Jan 14, 2006
#1
  • Jan 14, 2006
  • #1
does anyone know the length of the pushrods for a 347 with edelbrock performer heads?
 

N8Miller

I need NOS....make it 2 of the big ones
Founding Member
Jul 26, 2000
2,661
0
0
Kingston, PA, USA
Jan 14, 2006
#2
  • Jan 14, 2006
  • #2
what cam?
i used 6.250 length and 3/8".
 
3

347lxvert

Member
Dec 1, 2005
135
0
16
Russellville, AR
Jan 14, 2006
#3
  • Jan 14, 2006
  • #3
thats the problem, i dont know what cam is in it, i got the motor from someone else, all i know is that it is a blower cam or power adder cam
 

N8Miller

I need NOS....make it 2 of the big ones
Founding Member
Jul 26, 2000
2,661
0
0
Kingston, PA, USA
Jan 14, 2006
#4
  • Jan 14, 2006
  • #4
does the previous owner have the cam specs or know what the cam is called? the only real way to figure it out is to measure it. the heads dont matter much in this post, its the cam thats the "X" factor.
 
3

347lxvert

Member
Dec 1, 2005
135
0
16
Russellville, AR
Jan 14, 2006
#5
  • Jan 14, 2006
  • #5
great, i have no way to get in touch with the person i got the motor from. thanks for you help
 

N8Miller

I need NOS....make it 2 of the big ones
Founding Member
Jul 26, 2000
2,661
0
0
Kingston, PA, USA
Jan 14, 2006
#6
  • Jan 14, 2006
  • #6
buy an adjustable checker for like $10 from a local parts store. measure it, buy the right length, get the pushrods. like i said, on BOTH edelbrock heads (Per. 2.02 valve and Vic jrs, 2.05 valves) and both cams (Comp Cams XE274 and my Custom Jay Allen) it was the same pushrod length both times!
 
3

347lxvert

Member
Dec 1, 2005
135
0
16
Russellville, AR
Jan 14, 2006
#7
  • Jan 14, 2006
  • #7
do you know how long stock pushrods are
 

N8Miller

I need NOS....make it 2 of the big ones
Founding Member
Jul 26, 2000
2,661
0
0
Kingston, PA, USA
Jan 14, 2006
#8
  • Jan 14, 2006
  • #8
i dont, sorry.
 
B

bimmertech

New Member
May 3, 2005
1,123
0
0
merriam, ks
Jan 14, 2006
#9
  • Jan 14, 2006
  • #9
347lxvert said:
do you know how long stock pushrods are
Click to expand...
6.272"

when i changed to my AFR's i had to use a 6.350"
 
3

347lxvert

Member
Dec 1, 2005
135
0
16
Russellville, AR
Jan 14, 2006
#10
  • Jan 14, 2006
  • #10
what kind of motor do you have? did you change your cam when you changed your heads?
 
B

bimmertech

New Member
May 3, 2005
1,123
0
0
merriam, ks
Jan 14, 2006
#11
  • Jan 14, 2006
  • #11
347lxvert said:
what kind of motor do you have? did you change your cam when you changed your heads?
Click to expand...
i have the stock 302, yes i did change my cam to a trick flow stg 1. heads and deck height play a very vital role in pushrod length. if you mill your deck or put on a thicker headgasket it will move your rokers further away resulting in a pushrod length delima.

long story short, find out how much he took off the block/heads and see if edelbrock says you may need a pushrod change.
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Jan 15, 2006
#12
  • Jan 15, 2006
  • #12
The only way to tell what you need is to buy a pushrod length checker and set-up, measure and buy the right length.

Summit sells them for $10-$11 you'll need one that goes from a min of 6.25"

There are too many variables, deck height, head deck thickness, etc..
 
You must log in or register to reply here.

Similar threads

G
Hello everyone! New to this forum but looking forward to posting and reading posts from others. I own a 70 mustang fastback 347 crate w / T5.
  • gnorton52
  • Oct 27, 2026
  • The Welcome Wagon
Replies
5
Views
170
The Welcome Wagon Oct 27, 2026
General karthief
Engine Pushrod Length?
  • foxbodyclark
  • Jan 25, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
411
Fox 5.0 Mustang Tech Jan 25, 2025
limp
1
Crank no start on a turbo and cammed pushrod 5.0
  • 1630stri
  • Sep 2, 2026
  • Digital Self-tuning Forum
Replies
2
Views
213
Digital Self-tuning Forum Sep 16, 2026
Qtrhrse23
T
408w pushrods
  • Towegage
  • Sep 19, 2025
  • Fox Engine Swaparoo
Replies
5
Views
493
Fox Engine Swaparoo Sep 19, 2025
Noobz347
B
Fuel 1990 installing edelBrock intake
  • Beaker
  • Oct 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
338
Fox 5.0 Mustang Tech Oct 6, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?