• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

put on plenum and TB with SC ...WOW !!!!

  • Thread starter Thread starter 2002BLGT
  • Start date Start date Sep 16, 2004
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Sep 16, 2004
#1
  • Sep 16, 2004
  • #1
throttle responce is 10 times better , pulls ALOT HARDER and I swear my boost gauge is going over 9 lbs with only a 8lbs pulley and no powerpipe now ..... had it sitting at home for 3 months and just put it on day before yesterday when I got my car back from getting the TSB on the tranny done and the centerforce clutch and aluminum driveshaft put it , man what a different car to drive now ...Air/fuel ratio was 11.1 and Tim from modularpowerhouse told me he tuned it that way so when I put the plenum and TB on it would hopefully bring it up a couple tenths and add a little power from not being so rich and I think it did , I swear it feels like it added 15-20 rwhp to this thing ..... GOTTA LOVE IT .....
 

stang976

New Member
Apr 13, 2004
853
0
0
Westchester, NY
Sep 16, 2004
#2
  • Sep 16, 2004
  • #2
2002BLGT said:
throttle responce is 10 times better , pulls ALOT HARDER and I swear my boost gauge is going over 9 lbs with only a 8lbs pulley and no powerpipe now ..... had it sitting at home for 3 months and just put it on day before yesterday when I got my car back from getting the TSB on the tranny done and the centerforce clutch and aluminum driveshaft put it , man what a different car to drive now ...Air/fuel ratio was 11.1 and Tim from modularpowerhouse told me he tuned it that way so when I put the plenum and TB on it would hopefully bring it up a couple tenths and add a little power from not being so rich and I think it did , I swear it feels like it added 15-20 rwhp to this thing ..... GOTTA LOVE IT .....
Click to expand...


great post man! alot of people have been waiting for a thread like this. I installled my accufab and totally agree that the throttle response is much more crisp. OT Question: where did you buy your aviator fuel pump from...as thats the only piece I am waiting for to complete my plower install??
 

Indiana

New Member
May 6, 2004
286
0
0
Sep 16, 2004
#3
  • Sep 16, 2004
  • #3
2002BLGT, do you have an accufab TB & plenum?
 
S

showstopper2

Founding Member
Apr 16, 2001
425
0
0
New Bedford, Ma.
Sep 16, 2004
#4
  • Sep 16, 2004
  • #4
you can get your Aviator pump from Randy in the Ford Parts section of www.ModularDepot.com he is by far the cheapest.

just a little FYI on the pump since its rather untested as far as how much HP it will support. I just pegged my fuel system on the dyno yesturday with the stock tank/Aviator combo at 431rwhp. we added fuel to the tune and it just couldn't give it up top. car started toward the lean side. I need to step up to the Cobra tank/pumps combo now to be safe.

I may have the tank and pump available soon if I order the Cobra setup if someone wants to buy it complete. PM me
 

w00t

New Member
Mar 26, 2004
334
0
0
Arlington TX
Sep 16, 2004
#5
  • Sep 16, 2004
  • #5
Thats the exact setup that I want to get. Great post man! Good to know what is working and not working for some people.
 
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Sep 17, 2004
#6
  • Sep 17, 2004
  • #6
its a trickflow plenum and accufab 75mm TB , aviator pump you can get from randy , I told my local dealer what randy was selling them over the internet for and they price matched it .... about $180 or so , just drill some holes in the bucket .....centerforce clutch and aluminum driveshaft had to help some too ....throttle responce alone was worth the $$ and time though .... IMO....
 
You must log in or register to reply here.

Similar threads

B
Odd situation on Dyno
  • Brsmustng93
  • Jun 5, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 6, 2019
mikestang63
PIP or TFI Gone Bad?
  • doctorj357
  • Apr 11, 2019
  • 1994 - 1995 Specific Tech
Replies
6
Views
4K
1994 - 1995 Specific Tech Apr 28, 2019
jozsefsz
B
KB 2.1 on '03 GT
  • Bowtierebel
  • Sep 30, 2018
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Oct 7, 2018
Dark04GT
S
My 95 v6 to v8 conversion project. Advice needed
  • Stangzpride
  • Jul 27, 2018
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 30, 2018
Stangzpride
S
R
  • Locked
Expired 1989 Mustang Gt/ 48k Miles On Motor/ Road Track
  • Ricky64
  • Feb 14, 2017
  • Fox Body Mustangs For Sale (1979-93)
Replies
1
Views
3K
Fox Body Mustangs For Sale (1979-93) Feb 16, 2017
Robert hamel
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?