putting EEC back

Mustangless

Member

Jun 27, 2003

903

1

18

home

Mar 3, 2007

#1

• Mar 3, 2007

• #1

I have pulled out my eec to put the tweecer on but now I can't get it back in. I have it part way in there but there is something stopping it from going all the way. I looked where it goes and there is some white plastic piece that I think might be the problem. It looks like it is an inch from going back but it will just not go.

 

Blackened302

Active Member

Jul 21, 2005

1,439

0

36

South TX

Mar 3, 2007

#2

• Mar 3, 2007

• #2

hehehe, i was having trouble doing this last night.

i took all that plastic crap out and it fit--really tight fit, but it did.

make sure there aren't any communication errors (usb cable and switch cable are connected properly) once it's in there before you put all the panels back in place.

 

T

tjh566

New Member

May 22, 2004

608

0

0

Northern Va

Mar 3, 2007

#3

• Mar 3, 2007

• #3

uhh, yeah, it doesnt fit too well, i just kinda put it back as far as i could and then put the panel back on.

 

Mustangless

Member

Jun 27, 2003

903

1

18

home

Mar 3, 2007

#4

• Mar 3, 2007

• #4

Did you rip it out, cut it or what?

Punisher302 said:

hehehe, i was having trouble doing this last night.

i took all that plastic crap out and it fit--really tight fit, but it did.

make sure there aren't any communication errors (usb cable and switch cable are connected properly) once it's in there before you put all the panels back in place.

Click to expand...

Mine isnt near far enough to put the panel back on.

uhh, yeah, it doesnt fit too well, i just kinda put it back as far as i could and then put the panel back on.

Click to expand...

 

T

tjh566

New Member

May 22, 2004

608

0

0

Northern Va

Mar 3, 2007

#5

• Mar 3, 2007

• #5

i didnt take any of the plastic out, it just fit somehow?? couldnt bolt it back up it was a little lower than the bracket but it worked

 

Mustangless

Member

Jun 27, 2003

903

1

18

home

Mar 3, 2007

#6

• Mar 3, 2007

• #6

now i see my problem.... I think



^ that white plastic holds it on, does not go behind it.

 

Attachments

• DSCF0236.webp

  84.4 KB · Views: 89

Black95GTS

Active Member

Jan 8, 2004

1,644

3

38

Marlborough, MA

Mar 3, 2007

#7

• Mar 3, 2007

• #7

I cut the white plastic piece out with some wire cutters and pliers. Fits snug but it did go in after that.

Its pretty funny, this is a universal TwEECer problem, and I've started a thread pretty identical to this one! Good luck with it, and don't be afraid to ask questions!

Adam