Pypes OR/H and Pypes Muffler deletes vids!

mustangman70 · May 19, 2008

Wow man it sounds viscous!!!

Can you m ake a vid of it ideling....maybe a walk around?

PSYKOSTEVO · May 19, 2008

I took off work early to have my Magnaflows taken off so now I have O/R X-pipe with muffler deletes.

It's quiet at idle, but helacious under throttle! Christ it sounds like I am going twice as fast as I am. LOL! IT's WAY louder under throttle than his video leads you to believe.

*After driving it tonight* - Holy Hell! This thing is rediculously loud. Cops have been pacing me and checking my car out. It is quiet during cruise, not much louder than my magnaflows. But even a nudge of the gas from a stop, like at the light, this thing sounds like "GENTLEMEN START YOUR ENGINES!" I started my car in the parking lot and a car 4 spaces over starting having it's alarm go off.

I found that it is considerably quieter when I start off in 2nd gear instead of first, and shift around 2,500rpms.

So anyone want to buy my magnaflow axle-backs? LOL!

PSYKOSTEVO · May 22, 2008

I heard that there is a good chance I will "suck a valve" now that I have so little restriction in my exhaust. is there truth to this?

metroplex · May 22, 2008

PSYKOSTEVO said:
I heard that there is a good chance I will "suck a valve" now that I have so little restriction in my exhaust. is there truth to this?

Never heard of that...

I do know that running exhaust headers or manifolds ARE necessary to prevent overheating of the exhaust valves because of the way they collect the exhaust gases.

kooldawg6 · May 26, 2008

Sounds like a track only car now
Mine is loud enough for me with the O/R H and MACs

Az Pete · May 26, 2008

I run my own muffler delete system. All stock under the car and I had the mufflers removed. In their place, I had built a pipe to attach to the stock mounting and used a 15-18" X 4" chrome tip. It sets about where the original tip did in alignment with the bumper. This cost me $80.00 as a trial. The stock mufflers will go right back on if needed. I like it and here in Panama City I have had no problems. Other locations I have driven it have been no problems either. Of course, I don't try drag racing the local law either.

Rubrignitz · May 31, 2008

Radman said:
First thing you will notice is that the right pipe is too low and too far out from the fascia. Thanks to pypes manufacturing for that. It goes on the rack Monday to shorten the mounting bracket (on the muffler delete) to provide proper alignment. The left pipe (tip) is close to the finished location it just needs to be centered.

http://img532.imageshack.us/my.php?image=mustangxn8.flv

I've been fighting that freakin' passenger tip all morning trying to get it to line up. Is shortening the only solution? I love my Pypes mids but this f'in right tailpipe is driving me crazy!

Rubrignitz · May 31, 2008

PSYKOSTEVO said:
I heard that there is a good chance I will "suck a valve" now that I have so little restriction in my exhaust. is there truth to this?

Total bs. Don't worry about having "too little" backpressure.

PSYKOSTEVO · Jun 2, 2008

Rubrignitz said:
Total bs. Don't worry about having "too little" backpressure.

Thanks for the reassurance. Hopefully it doesn't hurt the car, because I still get a hard-on everytime I get on the gas.

NastyStang113 · Jun 2, 2008

PSYKOSTEVO said:
Thanks for the reassurance. Hopefully it doesn't hurt the car, because I still get a hard-on everytime I get on the gas.

It won't, you'll be good to go !!

UrbanRedneck · Jun 3, 2008

I've never heard of "sucking a valve". If you run no maifold, or an open manifold or shorty header (maybe), you can BURN a valve, because after every exhaust gas pulse there is a slight suction for a split second, and it sucks cold air onto the hot exhaust valve and can damage it. But as long as you have a foot or two of pipe, that won't happen. So you are perfectly fine.

PSYKOSTEVO · Jun 4, 2008

I've got stock manifolds on there now, My shorties are sitting in a box........anyone want to buy them? Other than that I have catless X-pipe, stock over axle, and custom muffler deletes after that.

PSYKOSTEVO · Jun 9, 2008

Here's my link to my exhaust setup. This vid is taken in car and features a startup, and only a light throttle tap.

http://video.google.com/videoplay?docid=-4984408711277321666

Pypes OR/H and Pypes Muffler deletes vids!

mustangman70

PSYKOSTEVO

Banned

PSYKOSTEVO

Banned

metroplex

Member

kooldawg6

mine works really well and can take a fair amount

Az Pete

Rubrignitz

New Member

Rubrignitz

New Member

PSYKOSTEVO

Banned

NastyStang113

New Member

UrbanRedneck

New Member

PSYKOSTEVO

Banned

PSYKOSTEVO

Banned

Similar threads

Pypes OR/H and Pypes Muffler deletes vids!

Banned

Banned

Member

mine works really well and can take a fair amount

New Member

New Member

Banned

New Member

New Member

Banned

Banned

Similar threads

Privacy & Transparency

Privacy & Transparency