• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Quarter glass mounting tape?

  • Thread starter Thread starter dolfan87
  • Start date Start date Mar 8, 2004

dolfan87

Founding Member
Dec 28, 2000
1,242
0
0
Lake Havasu, AZ
Mar 8, 2004
#1
  • Mar 8, 2004
  • #1
Ok, does anyone here have any experience with the 69-70 rear quarter glass coming off from the chrome? Mine was really loose, and I simply just tugged at the chrome, and it came off the glass. That mounting tape was a pain to get out of the channel, but can I simply take the two pieces to a glass shop, or am I screwed?

Anyone know?

87
 
S

Snail50

Founding Member
Mar 24, 2001
787
0
0
Miami
Mar 8, 2004
#2
  • Mar 8, 2004
  • #2
is it tape, or some sort of sticky gasket material? A glass shop could probably help you, so long as everything is intact and all it needs is to be re-mounted. Good luck.
 

dolfan87

Founding Member
Dec 28, 2000
1,242
0
0
Lake Havasu, AZ
Mar 8, 2004
#3
  • Mar 8, 2004
  • #3
I was assuming it was some sort of double sided tar based tape, but I am not a glass guy.

I guess I will just take it down tomorrow.

Thanks

87
 
G

gp001

Founding Member
Jun 30, 2001
4,401
0
66
So. Cal.
Mar 8, 2004
#4
  • Mar 8, 2004
  • #4
NOOOOOOOOOOOOOOOOOOOOOOOo don't take it to a glass shop. I don't know if you ever read the posts about my experience with trying to have a glass shop do mine, but let's just say it wound up involving some damaged trim, some violence, the police, a threatened lawsuit (against me), and me doing them my self. I assume they are done pretty similar to the glass on my car. I found 1 out of 20+ shops I talked to who said he knew how to do it, then they F'd up my trim

It is called Bulk Glass Tape. I couldn't find it at any Mustang supplier, paint & body supply, etc.. I finally found it at a Vintage Ford Truck parts place here in So. Cal. It feels sort of like leather, no adhesive. The trim piece actually compresses it. When it gets old, dry, and thin the trim won't hold.

Here's how I did it. I removed the screws holding the trim piece to the frame. I laid a piece of felt on the glass and a block of wood on top of it. Then I used a small "soft" mallet to tap the trim piece off the glass and the frame off the glass. Next you would place the bulk glass tape over the edges of the glass (I used clothes pins to hold it over nite and then it would retain most of it's shape). Then I tapped the glass into the frame using the soft mallet, then tapped the trim piece onto the glass in the same manner.

If you want to do it yourself and can't find the tape e-mail me and I'll see if I have some left, or I can buy it for you here and ship it to you.

Let me know
 
G

gp001

Founding Member
Jun 30, 2001
4,401
0
66
So. Cal.
Mar 8, 2004
#5
  • Mar 8, 2004
  • #5
Heres a pic so you can see what I was talkin about

 

dolfan87

Founding Member
Dec 28, 2000
1,242
0
0
Lake Havasu, AZ
Mar 9, 2004
#6
  • Mar 9, 2004
  • #6
gp...does this tape come in different widths, and thicknesses? The Chrome piece has a channel that is 3/8" wide, and the glass is 3/16 wide.

Was yours the same widths?

http://pictures.sprintpcs.com//share.jsp?invite=fEe4P98Z5zPdUhghaanx&shareName=Photo

Here is a picture of the channel, at the top and bottom I would have to custom cut the tape around those little dog ear things, and so I would need a total width of like 2.5" and then just cut it out to fit the piece.

This is upsetting, as I am getting close to getting this car together, and this would hold me up big time. I would have to have to buy new quarter windows.

Let me know if you can get the tape, (and if it will work for me) I will pay you for your time bro.

87
 

dolfan87

Founding Member
Dec 28, 2000
1,242
0
0
Lake Havasu, AZ
Mar 9, 2004
#7
  • Mar 9, 2004
  • #7
http://pictures.sprintpcs.com/guest...o&invite=HET4Pu8M5YasYhEh0Ua0&shareName=Photo

Here is what the whole thing looks like. This chrome piece has to hold the glass by itself...there is no frame...would it still work?
 
G

gp001

Founding Member
Jun 30, 2001
4,401
0
66
So. Cal.
Mar 9, 2004
#8
  • Mar 9, 2004
  • #8
I looked in my 1965 - 1973 Mustang Parts Illustrations Catalog and it appears that they used the bulk glass tape. Take a look at the pic below. The tape is wide (don remember the exact specs). I will look today to see if I have some of the tape left over. If I do you would only need to pay the postage. If I don't have any left over I will contact the Ford truck place and get the specs and cost for you.

 

dolfan87

Founding Member
Dec 28, 2000
1,242
0
0
Lake Havasu, AZ
Mar 9, 2004
#9
  • Mar 9, 2004
  • #9
GP...yes, that's the stuff to use then. Just PM me with what it costs, and I will send you a check.

Actually my band is going to be in L.A. in two weeks, are you anywhere near the area?

87
 
G

gp001

Founding Member
Jun 30, 2001
4,401
0
66
So. Cal.
Mar 9, 2004
#10
  • Mar 9, 2004
  • #10
dolfan87 said:
GP...yes, that's the stuff to use then. Just PM me with what it costs, and I will send you a check.

Actually my band is going to be in L.A. in two weeks, are you anywhere near the area?

87
Click to expand...

You have a PM
 
You must log in or register to reply here.

Similar threads

T
Convertible A-pillar weatherstrip issues
  • thiefofcheese
  • Oct 24, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
340
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 20, 2025
AeroCoupe
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
496
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Wheels-Tires LS mii swap and rear rim size/axle questions....
  • 78mIIman
  • Feb 2, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
6
Views
719
1974 - 1978 Mustang II Talk & Tech May 6, 2025
78 Mach1
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
694
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
Paint and Body Convertible Quarter Window - channel replacement adhesion?
  • R82148V
  • Dec 30, 2021
  • Fox 5.0 Mustang Tech
Replies
4
Views
968
Fox 5.0 Mustang Tech Jan 2, 2022
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?