• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

QUARTER WINDOW TRIM RESTORED! PICS

  • Thread starter Thread starter smokin91'
  • Start date Start date May 7, 2006
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

smokin91'

New Member
Feb 19, 2006
204
2
0
May 7, 2006
#1
  • May 7, 2006
  • #1
I finally got around to restoring my quarter window trim the other weekend. I sanded/painted that along with the trim around the doors and the side mirrors and door handles as well. Before the job my quarter mouldings were pitted so bad in some spots its all I could look at when I would look at my car, they drove me nuts.

I did one side at a time. I masked off all around the trim and windows and bought a few plastic painting sheets and put that over the car and cut out the size of the area needed to paint and taped it down. I started off by sanding them with 180 grit, but the pits were so bad in some spots that the sandpaper wasnt doing ****, so I got out my dremel with a round sandpaper bit on it and went to town on the really really badly pitted spots. After getting all the really pitted spots flat I went at it again with the 180 until the surface had no more pits in it. After the 180 I did it with 300 then 400 then 600. After that I primered it with a few coats and let it dry. Sanded it down again with 600 then painted it. At first I painted it with semigloss black with a few coats and let it dry. It looked better then it did before but it still had that old flat look to it, so I went back to the store and picked up some Gloss black paint. After giving it another sand again with 600 grit I hit the trim and the quarter mouldings, mirrors and handles with a couple coats of the Gloss. WOW the gloss looks so much better then the flat looking black.
The next day I was so happy with how it came out that I got right to work doing the other side. So after it was all done and done it ended up costing me about 60$ in supplies for paint/tape/plastic and sandpaper. The automotive masking tape was the biggest cost becuase I used to much of it.

1 thing to anyone attempting to do this. IT TAKES ALOTT of friggin sanding. You have to keep sanding and sanding and sanding and well you get the point. My fingertips were sanded smooth by the time I was done. I spent probably at least 3-4 hours sanding each quarter window moulding. Possibly more. The end result was so totally worth it though. All I have left to do now is the little bit of trim around the front and rear windshield.

Heres the pics.




 

Kabuki_notch

Founding Member
Nov 19, 2001
670
394
113
Rochester, NY
May 7, 2006
#2
  • May 7, 2006
  • #2
that looks great man good job
 

Bolt on 5.0

Founding Member
Jun 26, 2002
302
0
17
Suffolk, NY
May 7, 2006
#3
  • May 7, 2006
  • #3
looks good, will it rub off though
 

smokin91'

New Member
Feb 19, 2006
204
2
0
May 7, 2006
#4
  • May 7, 2006
  • #4
Bolt on 5.0 said:
looks good, will it rub off though
Click to expand...

No. Why would it rub off? Its PAINT!
 
Reactions: bruno

freshstang

New Member
Apr 18, 2006
13
0
0
May 7, 2006
#5
  • May 7, 2006
  • #5
would it have been easier to get new moulding?
 

poneypower89

Now everyone in the world will know I wanna bang t
Dec 6, 2004
0
3
28
Indianapolis, Indiana
May 7, 2006
#6
  • May 7, 2006
  • #6
freshstang said:
would it have been easier to get new moulding?
Click to expand...

Its not always about ease man... its about cost effectiveness...

you ever looked at how much it cost to get new quarter window molding and then install it? Im pretty sure you have to pop out the quarter window to do that to... so its not neccessarily easier that way either.
 

freshstang

New Member
Apr 18, 2006
13
0
0
May 7, 2006
#7
  • May 7, 2006
  • #7
would it have been easier to get new molding?
 

freshstang

New Member
Apr 18, 2006
13
0
0
May 7, 2006
#8
  • May 7, 2006
  • #8
sorry for the double post, im in the ocean and it didnt look like it went up the first time....
 

MahFiVeOh

Founding Member
Apr 26, 2002
531
9
49
Ontario, Canada
May 7, 2006
#9
  • May 7, 2006
  • #9
Looks good
When i had my car repainted 2 mths ago i had the body guy repaint all my trim gloss black.Looks ALOT better than it did before but he could have done a better job prepping the 1/4 window trim Maybe i should redo it myself.
 

smokin91'

New Member
Feb 19, 2006
204
2
0
May 7, 2006
#10
  • May 7, 2006
  • #10
Replacing the windows/moulding was not an option. You cant buy the moulding seperate its attached to the window. You have to buy a whole new reman'd window and moulding and they are like 500$ a piece, so for less then it costs for a full tank of gas and a few days in the garage the trim looks like new again.
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
May 7, 2006
#11
  • May 7, 2006
  • #11
looks great, i've been planning on this for quite some time now, just need to get home from college in order to do it! LOOKS GREAT!
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
May 7, 2006
#12
  • May 7, 2006
  • #12
new window molding and glass is like 400 for both, but they dont say mustang on them....which i dont think i could handle.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
2
58
Port Elgin, Ontario
May 7, 2006
#13
  • May 7, 2006
  • #13
you can buy some trim covers for both sides off ebay for like 75 bucks and they look good I seen them on a car at a car show
 

Jaswir

Member
Mar 31, 2005
578
0
18
Orlando, FL
May 7, 2006
#14
  • May 7, 2006
  • #14
but the trim around the window is rubber right? you sanded that down while its on the car???
 

smokin91'

New Member
Feb 19, 2006
204
2
0
May 7, 2006
#15
  • May 7, 2006
  • #15
yea I sanded it while it was on the car. I put 3 layers of automotive masking tape all around the window and anywhere else that i would be sanding so I wouldnt cut through the tape and hit my paint. I spent so much time taping it off and taped it off so well you would think i took them off the car to do it.

Preperation is the key
 

88 Fox GT

Active Member
Nov 18, 2002
1,674
0
36
Iowa
May 7, 2006
#16
  • May 7, 2006
  • #16
Roland69 said:
you can buy some trim covers for both sides off ebay for like 75 bucks and they look good I seen them on a car at a car show
Click to expand...
I've seen those somewhere and they looked like ass.

Great job on the restoration of the trim! I need to get around to doing mine sometime. I also need to get all the trim painted black again...previous owner painted it all the same color as the car. I prefer black trim, I think it makes the over all look of the car much better.
 

Jaswir

Member
Mar 31, 2005
578
0
18
Orlando, FL
May 7, 2006
#17
  • May 7, 2006
  • #17
smokin91' said:
yea I sanded it while it was on the car. I put 3 layers of automotive masking tape all around the window and anywhere else that i would be sanding so I wouldnt cut through the tape and hit my paint. I spent so much time taping it off and taped it off so well you would think i took them off the car to do it.

Preperation is the key
Click to expand...

wow that something i never knew you could do! i am going to have to do that to mine soon! thanks for the tips!
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,356
208
114
Ohio
May 7, 2006
#18
  • May 7, 2006
  • #18
Nice job on your car! I have also seen people fill the pits with red spot putty and then use trim paint on them and they looked great too!
 

nonglossjason

I did not have intercourse with a sheep.
Jan 27, 2006
138
20
39
May 8, 2006
#19
  • May 8, 2006
  • #19
what is this red spot putty you speak of? pics? :SNSign:
 
G

GREYFOX4INCH

Member
May 8, 2005
190
0
16
western MA
May 8, 2006
#20
  • May 8, 2006
  • #20
yeh and i think if you get the windows through ford they will charge you like $700 each, nevermind 400-500.

i have heard that the trim covers sucked pretty bad but have never seen them in person.
roland69 and 88 fox gt already dissagree on that so.....
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

S
Quarter window notch
  • Stock90Notch
  • Apr 23, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
960
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2024
91AOD5.0LX
T
Convertible A-pillar weatherstrip issues
  • thiefofcheese
  • Oct 24, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
309
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 20, 2025
AeroCoupe
Paint and Body What to use to clean up/prep painted surfaces before painting
  • AnthonyA1234
  • Sep 27, 2024
  • Fox 5.0 Mustang Tech
Replies
4
Views
459
Fox 5.0 Mustang Tech Sep 28, 2024
limp
G
New, 2005 Red V6 Convertible
  • Ginger2005
  • Jan 3, 2026
  • The Welcome Wagon
Replies
3
Views
333
The Welcome Wagon Jan 4, 2026
2Blue2
Progress Thread Nicholase "lights out" build- TKX install
  • nicholase
  • Aug 10, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 26 27 28
Replies
542
Views
33K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 14, 2026
Mac131
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?