Question about 4.10's

crazynorwegian said:
dont drive more then 20 miles with out letting the gears cool off for about 15-20min and dont go over 55mph for the first 100miles. thats what the guy told me when I had mine installed
I have heard break in periods like that specified as well but I have heard no break in required much more often.

That being said, breaking then in can't hurt...
 
i just had mine installed at a dealer. the mechanic specializes in that kind of work and he told me don't beat on it for about 20 miles so the fluid can get to all the parts and then do whatever i want after that.
 
MikeZ28 said:
drive around for about 20-30 minutes taking turns at low speeds too. ( make sure the t-loc discs get some work too,.


then go out for another ride and hammer it and think. " wow these are so much better than those suck ass 3.23's "



3.23's ehhhh :D


to add my two bits on this. i'm sure breaking in the gears is a good thing to do & all but both car's i put 4.10's in i didn't do a break in period with them & they were just fine. nopt say ing to do that, jsut stating my cars were fine with no breakin, it could be a completely different with yours
 
http://www.differentials.com/install.html

All new gear sets require a break-in period to prevent damage from overheating. After driving the first 15 or 20 miles you must let the differential cool for 30-40 minutes before proceeding. Drive 500 easy miles before towing. Tow for very short distances (less than 15 miles) and let the differential cool before continuing during the first 45 towing miles. Change the gear oil after the first 500 miles. This will remove any metal particles or phosphorus coating that has come from the new gear set.