Question about C&L MAF's

CManT1914 · Jul 11, 2005

Okay so I got my 76mm C&L maf today to get my car running. But it uses the stock electronics, from my stock MAF. Well I still had it laying around, so it wasn't a problem or anything, but a while back I swapped to my Pro-M MAF because my stocker was taking a dump on me. My car was losing power because of the MAF. Now here's the question, won't the C&L using the stock electronics cause the same problems as I had a while back? Like, for it to run good, am I gonna have to buy a new stock MAF for the electronics? That would suck.

cavscout371 · Jul 11, 2005

clean and unplug it if it runs the same way unplugged you know its bad, I reused my old one and it worked fine

CManT1914 · Jul 12, 2005

cavscout371 said:
clean and unplug it if it runs the same way unplugged you know its bad, I reused my old one and it worked fine

So while it's running, just pull the plug on the MAF, and hopefully it will die right? Cus if it doesn't, then it's bad?

88_GT_5_oh · Jul 12, 2005

FYI i used the electronics from a 93 3.8 taurus on my c&l. i did a mass air conversion and didn't have the electronics. $10 from a junk yard

when i did my dyno tune the A/F was very very clost (new motor so its not gonna be exact)

Edit: just realized i was in the 95/95 section lol, should still be the same though

CManT1914 · Jul 12, 2005

88_GT_5_oh said:
FYI i used the electronics from a 93 3.8 taurus on my c&l. i did a mass air conversion and didn't have the electronics. $10 from a junk yard

when i did my dyno tune the A/F was very very clost (new motor so its not gonna be exact)

I figure if my electronics are bad, there's gotta be some stangers locally that are getting rid of theirs.

88_GT_5_oh said:
Edit: just realized i was in the 95/95 section lol, should still be the same though

Thanks man.

chrisilversvt · Jul 13, 2005

check ebay as well can be had on there for dirt cheap...

Venom351R · Jul 13, 2005

I still have the stock electronics ( MAF ) for mine that I used on my C&L Meter. I dont need it now since I have a PRO-M that comes w/ a diffrent electronics

Question about C&L MAF's

CManT1914

New Member

cavscout371

New Member

CManT1914

New Member

88_GT_5_oh

Sportin' a turbo 5.0 in Canadistan

CManT1914

New Member

chrisilversvt

New Member

Venom351R

Similar threads

Question about C&L MAF's

CManT1914

New Member

cavscout371

New Member

CManT1914

New Member

88_GT_5_oh

Sportin' a turbo 5.0 in Canadistan

CManT1914

New Member

chrisilversvt

New Member

Venom351R

Similar threads

Privacy & Transparency

Privacy & Transparency