Question about shift boot

S

savegoodautonfg

New Member

May 11, 2005

1,085

0

0

Jul 29, 2007

#1

• Jul 29, 2007

• #1

Air comes thru my shifter bezel because the rubber and such is ripping..

under there there is just this:

and this right?

I just want to make sure that this is all that is under there.

and how does the upper shift boot leather connect to the lower shift boot with metal ring?

 

ryan218

In just 10 years, I'll be old enough to drive!!!!

Dec 28, 2005

0

1

38

columbus ohio

Jul 29, 2007

#2

• Jul 29, 2007

• #2

savegoodautonfg said:

Air comes thru my shifter bezel because the rubber and such is ripping..

under there there is just this:

and this right?

I just want to make sure that this is all that is under there.

and how does the upper shift boot leather connect to the lower shift boot with metal ring?

Click to expand...

if i remember correctly it you twist the pin till it clicks been a while since i messed with one...but thats how i put the boot on the 86.

 

RsStanG1987

I shaved all my pubes playing this game.

10 Year Member

Mar 13, 2004

569

9

79

Dupont PA

Jul 29, 2007

#3

• Jul 29, 2007

• #3

they dont connect to each other. only on the 79-86 models They only connect by 4 bolts.... 87-93 there are 2 boots all together..

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,264

17,952

224

Massachusetts

Jul 29, 2007

#4

• Jul 29, 2007

• #4

The gold peice bolts to the trans tunnel

the other shift bolt is held to the shifter bezel trim peice by small clips. Be careful when removing your old boot otherwise the plastic pins break and then you need to buy the shifter bezel as well. Take your old shift bezel/boot out and you'll see how it fits

 

S

savegoodautonfg

New Member

May 11, 2005

1,085

0

0

Jul 31, 2007

#5

• Jul 31, 2007

• #5

My plastic pins all already broken cuz that shifter boot is not connected to the bezel.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,264

17,952

224

Massachusetts

Jul 31, 2007

#6

• Jul 31, 2007

• #6

then you will need to buy a new bezel to attach it

 

25thmustang

Mustang Master

Sep 5, 2003

2,021

85

99

Montgomery, NY

Jul 31, 2007

#7

• Jul 31, 2007

• #7

I taped mine on... I have an aftermarket boot and this seemed to work alright for the time being. I think a little RTV should hold it fine.

 

S

savegoodautonfg

New Member

May 11, 2005

1,085

0

0

Jul 31, 2007

#8

• Jul 31, 2007

• #8

anyone have this stuff for sale?