Question about steering?

[SYLENTBUTVYLENT]

I wanted to get rid of the big ugly power steering pump bracket on my 92. I found the March powder coated bracket for cheap, but now I cant get the damn pump out of the old bracket. Anyone help? Pictures? Schematic?

 

[90mustangGT]

Take off the whole assembly bracket and all, if I can remember right, there are a few bolts that you have to get from the other side that hold the pump and resivour to the bracket.

 

[HISSIN50]

you are trying to just get the bracket off the pump (the bracket comes out of the car with the pump)?

if so, Jason is right on. i think it is 3 bolts that hold it in. air tools or a very careful positioning in a vice would work. then the snail should come off.

good luck.

 

[rd]

On most Mustang 5.0's the pulley must be removed from the pump to get the pump out of the bracket. You need a puller. Most parts stores carry them.

The whole assembly will come off the engine together though. Then you can take it to a parts store or shop to remove the pulley, if you need the bracket.

 

[Michael Yount]

rd's nailed it - pulley has to come off first. Autozone will loan you the proper pulley puller for a small refundable deposit.