• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Question on Chime Module and Airbag controller?

  • Thread starter Thread starter stevedjarrell
  • Start date Start date Jun 12, 2024
S

stevedjarrell

Member
Jun 9, 2024
22
19
13
Milford CT
Jun 12, 2024
#1
  • Jun 12, 2024
  • #1
Good day all, I was curious about the nessecity of retaining the Chime module and the Airbag controller. I have a 1992 LX. I bought a started project and am completing it. All the factory electronics have been removed along with the Dash, ECU and all EFI related harnesses. I am running a Holley Sniper 2 with the complete Ecosystem, Hyper spark everything including the PDM. Dash was swapped to a Dakota digital along with GPS speedo and most other data coming from the Sniper. All that said I have a lot of wiring that I am not sure I need. I am slowly working through it. this leads to my question. I no longer have the airbag as the steering wheel is changed. all sensors were removed as well. Can I simply unplug and remove the control module? Also, what about the chime Module, I do not need to be reminded of lights left on as the battery cut off will be flipped when not in use. I realize I am disabling systems; however, they were removed before I bought the car. I am retaining all lights, power windows/locks, neutral safety etc. just trying to clean it up and thin out the wiring.
 

AeroCoupe

lube between the nut and the face. I know my lubes
Founding Member
Oct 28, 2001
6,242
4,334
183
Claremore, OK
Jun 12, 2024
#2
  • Jun 12, 2024
  • #2
No reason not to remove them. If you do not have the airbag computer in the stock vehicle the CEL will not illuminate so being you no longer have the stock dash then, air bag, or sensors it's a very light boat anchor. I have the chime module disconnected in my Coupe as it annoyed the crap out of me. Been that way for about 20 years.
 
Reactions: General karthief
S

stevedjarrell

Member
Jun 9, 2024
22
19
13
Milford CT
Jun 12, 2024
#3
  • Jun 12, 2024
  • #3
Thank you AeroCoupe, much appreciated. I am realizing there is a lot of wiring I could remove but not sure about the different circuits need for things like the neutral safety for the starter etc. Hopefully when that book that was mentioned in my other thread comes in it will help me to lighten everything even more.
 
You must log in or register to reply here.

Similar threads

A
SN95 Multifunction Madness! Need some big brain assistance from you folks
  • Awnaw
  • Oct 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
142
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 10, 2026
AeroCoupe
C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
253
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
198
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
W
I need a 1997 Mustang PATS A expert!
  • Wolfdogg
  • Oct 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
206
1996 - 2004 SN95 Mustang -General/Talk- Oct 5, 2026
Noobz347
D
airbag module/controller disassembly/repair in Mustang used from 94-97
  • dcm0123
  • Aug 26, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
688
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 29, 2024
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?