• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

rack and pinion bushing install help!

  • Thread starter Thread starter latham83
  • Start date Start date Apr 7, 2007

latham83

New Member
Jul 24, 2003
496
0
0
Apr 7, 2007
#1
  • Apr 7, 2007
  • #1
hey can anyone help me with installing new rack and pinion bushings???
i'm real bad with the suspension and I do not know anything really about where to look or where the bushings are..or how to get them out..but im doing my shocks/struts so i figured it would be a good time..
I do no have the 5 lug conversion, so i do not need the offset ones i guess..just the regular size..
can someone help me with the replacement of these? i have no idea where to even look..how many does the rack have?

oh and if i wanna do my sway bar bushings, how do i know what size to get? I see there are differenent size bushings??
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 7, 2007
#2
  • Apr 7, 2007
  • #2
For the rack, offset bushings are for lowered cars, not 5 lug conversions per se.

There were one and two piece bushings on aero foxes as I recall. NOTE that many parts store racks will have the WRONG bushings and you're stuck reusing your old ones (or the new ones you bought separately). You can check your existing bushings to see which kind you have (so you can order the right ones).

For the anti-sway bar, get under and measure the diameter of the bar. You can use a Vernier caliper. If you don't have one, I have used a crescent wrench. Tighten it snug onto a clean spot on the bar near the existing bushings. Now pull the wrench out and measure the distance across the jaws.

Good luck.
 
M

mfewtrail

Member
Sep 3, 2003
82
0
6
North GA
Apr 8, 2007
#3
  • Apr 8, 2007
  • #3
1990 Rack bushings should be two-piece(at least the last 1990 I installed a rack in had two piece bushings and everything was supposedly original on it). As for location, refer to this picture(I borrowed it from another website, enlarged it, and added some crude arrows to point out the rack mounting/bushing locations).

http://home.alltel.net/mfewtrail/images/stang.jpg
 
You must log in or register to reply here.

Similar threads

J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
347
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
Suspension End link replacement size
  • Teen'93stang5.0
  • May 12, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
302
Fox 5.0 Mustang Tech May 20, 2026
Teen'93stang5.0
B
Rack and pinion options
  • Bronco Bart
  • Sep 7, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 13, 2025
AeroCoupe
D
Running both lean and rich with O2 heat codes
  • Danceswithfire5
  • Aug 30, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
183
SN95 V6 Mustang Tech Sep 5, 2026
apple99Mustangdude
A
F
3G Alternator install question
  • fathead429
  • Oct 24, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
7
Views
265
1974 - 1978 Mustang II Talk & Tech Oct 25, 2026
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?