rack and pinion bushing install help!

latham83

New Member
Jul 24, 2003
496
0
0
hey can anyone help me with installing new rack and pinion bushings???
i'm real bad with the suspension and I do not know anything really about where to look or where the bushings are..or how to get them out..but im doing my shocks/struts so i figured it would be a good time..
I do no have the 5 lug conversion, so i do not need the offset ones i guess..just the regular size..
can someone help me with the replacement of these? i have no idea where to even look..how many does the rack have?

oh and if i wanna do my sway bar bushings, how do i know what size to get? I see there are differenent size bushings??
 
For the rack, offset bushings are for lowered cars, not 5 lug conversions per se.

There were one and two piece bushings on aero foxes as I recall. NOTE that many parts store racks will have the WRONG bushings and you're stuck reusing your old ones (or the new ones you bought separately). You can check your existing bushings to see which kind you have (so you can order the right ones).

For the anti-sway bar, get under and measure the diameter of the bar. You can use a Vernier caliper. If you don't have one, I have used a crescent wrench. Tighten it snug onto a clean spot on the bar near the existing bushings. Now pull the wrench out and measure the distance across the jaws. :D

Good luck.