• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Engine Ran my code reader and

  • Thread starter Thread starter Mindseye007
  • Start date Start date Aug 10, 2024

Mindseye007

5 Year Member
Oct 21, 2020
546
126
63
ontario
Aug 10, 2024
#1
  • Aug 10, 2024
  • #1
Just did my oil change 5w30 Mobil 1 fully Synthetic Extended milage with the Motorcraft FL1 OIL filter and My car is running like a dream so smooth and is getting better gas milage since I added a new Egr valve So I took her out for a drive yesterday there was no CEL but when I got back I decided to check for codes anyway.

KOEO : 41 91 95 85 15
KOER : 21 94 44
I also have a svt chip installed for code 15 and 2 brand new Motorcraft oxygen sensors. Let me know you thoughts on the other codes maybe some things are turned off in the tune for 94 Octane.
 
Last edited: Aug 10, 2024

89ripper

Founding Member
Jun 3, 2002
926
308
103
Rockford, Illinois
Aug 11, 2024
#2
  • Aug 11, 2024
  • #2
Well 41/91 are system running lean..you replaced oxygen sensors and you said it ran fine, so maybe just need to reset and clear codes. You have some smog codes as well from doing a search on here you can find jrichker posts on how to do some of the testing for those. Its a little over my hesd but thats how I cleared up my problems. I used to get 41 and 91 turned out to be the wiring, but my car was running like crap
 
Reactions: Mindseye007

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,141
17,838
224
Massachusetts
Aug 18, 2024
#3
  • Aug 18, 2024
  • #3
The KOEO codes may be history codes. You may want to erase the codes, do a couple drive cycles and then pull them again to see if they are current.
 
Last edited: Aug 19, 2024
Reactions: Shakerhood, Mindseye007, General karthief and 1 other person

Mindseye007

5 Year Member
Oct 21, 2020
546
126
63
ontario
Aug 19, 2024
#4
  • Aug 19, 2024
  • #4
Mustang5L5 said:
The KOEO codes mate be history codes. You may want to erase the codes, doa couple drive cycles and then pull them again to see if they are current.
Click to expand...
OK, I will do that thanks Mustang5L5.
 
You must log in or register to reply here.

Similar threads

P
CEL light on and Can't pull KOER codes.
  • psfoxstang
  • May 7, 2024
  • Fox 5.0 Mustang Tech
Replies
5
Views
1K
Fox 5.0 Mustang Tech Jun 20, 2024
psfoxstang
P
J
Thanks for the information on codes 31,34,44 and 94!
  • JK86LX50
  • Mar 5, 2025
  • The Welcome Wagon
Replies
3
Views
256
The Welcome Wagon Aug 5, 2025
gkomo
Engine Throwing codes 94, 33, 34, 44, and sporadic engine shutoff.
  • Ryu
  • Oct 9, 2024
  • Fox 5.0 Mustang Tech
Replies
11
Views
834
Fox 5.0 Mustang Tech Oct 16, 2024
89ripper
Engine **FIXED** Code 67 preventing KOER test... but clutch is pressed and A/C is deleted??
  • TomOsiris
  • Jun 21, 2022
  • Fox 5.0 Mustang Tech
  • 2
Replies
37
Views
5K
Fox 5.0 Mustang Tech Dec 25, 2022
wbrockstar
D
Progress Thread 93 lx fix'n it up
  • diesel farmer
  • Jan 22, 2022
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 9, 2022
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?