Hey Stangnet. You guys seem to know your stuff and be very helpful, so I thought I would make a post on here and ask you guys a question. Here's the deal. This summer I want to buy a new n/a 2.3 Head and modify it to get more horsepower. I dont really have the money or the time to be pulling the block apart, so I want to only modify things in the head without having to adjust or replace anything in the block. I have heard of guys taking Rangers cams and cam followers and putting them in the 2.3 Mustang. I also wanted to put in some oversize valves and shave the head for increased compression. Now, here are some of the questions I had for you guys. Would any of these head modifications require me to tinker with the block? If I did this Ranger cam swap do I need anything other than the cam and the cam followers? With these listed modifications how much do you think horsepower will be increased by? Can you recommend anything else that I can have done to the head without having to touch the block? Ok, I think that is all. If I think of anything else I will be sure to post it. Any of your input and time is greatly appreciated. Thanks again.
-- James --
-- James --