Removing steering wheel

FalconGuy016

New Member
Oct 26, 2004
437
1
0
Northern VA
I was in the drive thru today getting my change from the drive thru window person. I put my hand on the wheel and give it a little turn to straighten out. I drop a DIME between the crack in the steering wheel face between the center part that pushes the horn and the outer part. :( :( :( :( :( :( :( :( :(

Now everytime I turn I hear a dime rolling around in there. Worse, once in a turn, it honked by itself. I have no clue how to get this thing open and I'm concerned about the air bag.

Does anybody know what I can do?
 
Ok pretty simple. THere are two little "covers" on the side of the steering collum (one right, one left), pop those off and remove teh screws. that removes the airbag. From there you should be able to access the area you're looking for, where the horn switches are, etc.
 
COramprat said:
Should be able to get to the dime with the idea above but I have to ask one question...you said you needed to remove driver's side steering wheel. You have on on the passenger side too?

I was thinking when I read it man you are lucky its not in the passenger side steering wheel, those are a bitch to take apart :D
 
triggz said:
You really do need to get the dime out soon, joking aside. Its possible for it to jump the contacts for the airbag and deploy just like it did for the horn.

it would have to rub thoguh wir insulation first - the airbag contacts at all sealed, and when teh connetor comes apart, the air bag shorts itself (bridges its contacts) so voltage has nowhere to go and cant deploy it