88LX Founding Member Nov 15, 1999 327 3 29 Chicago, IL Jun 15, 2006 #1 Jun 15, 2006 #1 any tricks to removing the tensioner? thanks
Hickfied Member Nov 9, 2005 413 0 16 Morganton, NC Jun 15, 2006 #2 Jun 15, 2006 #2 Put a socket on the pulley bolt (17 18 or 19MM) and rotate to get the belt off, then just unbolt it from the mount.
Put a socket on the pulley bolt (17 18 or 19MM) and rotate to get the belt off, then just unbolt it from the mount.
mike50sa New Member Apr 12, 2003 26 0 0 san antonio, texas Jun 15, 2006 #3 Jun 15, 2006 #3 I use a breaker bar with socket. Put it on the nut in the back and rotate. The tensioner will 'flex' and allow you to remove the belt. Watch your fingers. Good luck.
I use a breaker bar with socket. Put it on the nut in the back and rotate. The tensioner will 'flex' and allow you to remove the belt. Watch your fingers. Good luck.