Removing The Pins From The '06 Pony Emblems?

J

Jennifer6525

New Member

Dec 26, 2004

3

0

1

Sep 13, 2005

#1

• Sep 13, 2005

• #1

For those of you that have added the '06 emblems to your V6 can you tell me how you removed the pins? Thanks!

 

fazm83

New Member

Apr 8, 2005

747

0

0

phoenix, arizona

Sep 13, 2005

#2

• Sep 13, 2005

• #2

Im sure you can use numorous things. Sandpaper, die grinder, grinding wheel. i own a shop, i get creative at times haha.

 

rygenstormlocke

former 10 second badass

Aug 13, 2005

698

0

0

Northern Virginia

Sep 13, 2005

#3

• Sep 13, 2005

• #3

I'm very interested in this, I purchased some pony emblems from a classic mustang site, but I am not going to drill holes into my fender.

What I found is my emblems are hollow, so using double sided 3m tape won't work with out filling the emblem. Anyone know if there is a place that sells them ready to go?

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

Sep 13, 2005

#4

• Sep 13, 2005

• #4

Jennifer6525 said:

For those of you that have added the '06 emblems to your V6 can you tell me how you removed the pins? Thanks!

Click to expand...

use some dykes (wire cutters) it takes then down in a snap!! or you could use a razor blade. the emblem is just plastic.

 

S

stanmckinney

10 Year Member

Mar 30, 2005

1,188

5

49

Sep 13, 2005

#5

• Sep 13, 2005

• #5

You can snip them off or grind them off. But there are Mustang emblems available from most suppliers that stick on and have no pins.
They should not be difficult at all to find.

 

martimus

New Member

Jan 2, 2005

104

0

0

'neath a cactus

Sep 13, 2005

#6

• Sep 13, 2005

• #6

I used a simple cutting bit on a dremel tool. The pins were off the emblem in a matter of seconds.

 

J

Jennifer6525

New Member

Dec 26, 2004

3

0

1

Sep 14, 2005

#7

• Sep 14, 2005

• #7

Thanks everyone! I didnt realize that the pins were plastic I thought they were metal.I was going to take them to work and have one of the maint. guys cut them off for me but I guess I'll be able to do it myself.Thanks again.