Replacing Rubber Seal Around Headlight.

[94GTLaserRC]

Do you just put some silicone around the light, and press the rubber seal into it, or is there a special sealer that is used for this purpose? Epoxy? Etc?

Thanks
RC

 

[The Green GT]

Im thinking about transfering the ones from my old corners and using some of that red 3M double sided tape.

 

[94GTLaserRC]

What do you use the hold he the rubber seal down?
RC

 

[The Green GT]

What rubber seal?

 

[94GTLaserRC]

What rubber seal?

The black one that surronds the parking lights:

 

[turbogt]

glue

 

[1TallMF]

I'd use a silicone-based adhesive that stays flexible and won't dry-out the rubber. That, or weatherstripping adhesive (but its yellow, IIRC). Epoxy may work too, but it wouldn't be my first choice.

 

[FlyBy763]

haha...i use RTV everytime it comes off my drivers side light....

I knocked it off once when it got stuck in the sponge when I was washing my car, has worked fine other than that.

 

[The Green GT]

that red 3M double sided tape.

 

[ProKiller]

i use weatherstriping adhesive. doesn't hold forever but it holds for a couple months and quite a few washings.

 

[94GTLaserRC]

Thanks guys!
RC

 

[4Jenna]

Thats why I dont run clears anymore...garbage
My stockers are still fine and the only time they were off is when I tried the clears