tomustang Psychotic Member Founding Member Jun 8, 2000 3,434 2 78 McLean Hospital Sep 30, 2005 #1 Sep 30, 2005 #1 Yeah everyone says it and "why not" but seriously Iv'e torn apart two 4.6L's an both times the guides and tensioners are still in great shape. Has anyone heard of a failure of the two?
Yeah everyone says it and "why not" but seriously Iv'e torn apart two 4.6L's an both times the guides and tensioners are still in great shape. Has anyone heard of a failure of the two?
Gearbanger 101 Straight Outta Locash 20+ Year Stangneter Aug 10, 2002 9,457 1,377 234 Ontario, Canada Sep 30, 2005 #2 Sep 30, 2005 #2 No....now get back to the boxing match!!! tomustang Psychotic Member Founding Member Jun 8, 2000 3,434 2 78 McLean Hospital Sep 30, 2005 #3 Sep 30, 2005 #3 DropTopPony Noob Slayer Founding Member Aug 13, 2002 2,570 3 48 south jersey Sep 30, 2005 #4 Sep 30, 2005 #4 mine were great @ 85,000 miles when i did my PI swap.. but i'm gonna put new in when I put the new combo together just because everything else will be new so might as well stick with the plan... Gearbanger 101 Straight Outta Locash 20+ Year Stangneter Aug 10, 2002 9,457 1,377 234 Ontario, Canada Sep 30, 2005 #5 Sep 30, 2005 #5 Tommy has no money. He's trying to put this 4V together with masking tape and play-doh. So he's not above cutting corners tomustang Psychotic Member Founding Member Jun 8, 2000 3,434 2 78 McLean Hospital Sep 30, 2005 #6 Sep 30, 2005 #6 i ran out of the play-doh, cause i ate it. DropTopPony Noob Slayer Founding Member Aug 13, 2002 2,570 3 48 south jersey Sep 30, 2005 #7 Sep 30, 2005 #7 he could always stand on a few corners for some dough. urban96 bubb rubb says:"woo woooooo" Founding Member Sep 24, 2002 3,464 1 69 Syracuse, NY Sep 30, 2005 #8 Sep 30, 2005 #8 when i was checking piston to valve clearence i didnt want to go to the store and buy some clay so i used my claybar You must log in or register to reply here.
tomustang Psychotic Member Founding Member Jun 8, 2000 3,434 2 78 McLean Hospital Sep 30, 2005 #3 Sep 30, 2005 #3
DropTopPony Noob Slayer Founding Member Aug 13, 2002 2,570 3 48 south jersey Sep 30, 2005 #4 Sep 30, 2005 #4 mine were great @ 85,000 miles when i did my PI swap.. but i'm gonna put new in when I put the new combo together just because everything else will be new so might as well stick with the plan...
mine were great @ 85,000 miles when i did my PI swap.. but i'm gonna put new in when I put the new combo together just because everything else will be new so might as well stick with the plan...
Gearbanger 101 Straight Outta Locash 20+ Year Stangneter Aug 10, 2002 9,457 1,377 234 Ontario, Canada Sep 30, 2005 #5 Sep 30, 2005 #5 Tommy has no money. He's trying to put this 4V together with masking tape and play-doh. So he's not above cutting corners tomustang Psychotic Member Founding Member Jun 8, 2000 3,434 2 78 McLean Hospital Sep 30, 2005 #6 Sep 30, 2005 #6 i ran out of the play-doh, cause i ate it. DropTopPony Noob Slayer Founding Member Aug 13, 2002 2,570 3 48 south jersey Sep 30, 2005 #7 Sep 30, 2005 #7 he could always stand on a few corners for some dough. urban96 bubb rubb says:"woo woooooo" Founding Member Sep 24, 2002 3,464 1 69 Syracuse, NY Sep 30, 2005 #8 Sep 30, 2005 #8 when i was checking piston to valve clearence i didnt want to go to the store and buy some clay so i used my claybar
Tommy has no money. He's trying to put this 4V together with masking tape and play-doh. So he's not above cutting corners
tomustang Psychotic Member Founding Member Jun 8, 2000 3,434 2 78 McLean Hospital Sep 30, 2005 #6 Sep 30, 2005 #6 i ran out of the play-doh, cause i ate it.
DropTopPony Noob Slayer Founding Member Aug 13, 2002 2,570 3 48 south jersey Sep 30, 2005 #7 Sep 30, 2005 #7 he could always stand on a few corners for some dough.
urban96 bubb rubb says:"woo woooooo" Founding Member Sep 24, 2002 3,464 1 69 Syracuse, NY Sep 30, 2005 #8 Sep 30, 2005 #8 when i was checking piston to valve clearence i didnt want to go to the store and buy some clay so i used my claybar
when i was checking piston to valve clearence i didnt want to go to the store and buy some clay so i used my claybar