• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

replacing tps

  • Thread starter Thread starter 87stangttop
  • Start date Start date Aug 27, 2005
8

87stangttop

New Member
Mar 17, 2003
36
0
0
Aug 27, 2005
#1
  • Aug 27, 2005
  • #1
I replace my tps, I just took the old one off and put the new one on is there anything else I have to do if so what and how? thanks
 

dkins419

New Member
Nov 14, 2004
187
0
0
Michigan
Aug 27, 2005
#2
  • Aug 27, 2005
  • #2
yes, you need to adjust your tps to .97-.99 volts with a digital voltometer. All you do is loosen both of the screws ( dont take them off ) then use the black wire as a ground and i believe its the green wire you use? Maybe someone here can clarify that. Then oce you get it to .97-.99 volts, tighten the screws back up.
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Aug 27, 2005
#3
  • Aug 27, 2005
  • #3
hey guys, while trying to find instructions on tps voltage adjustment, i ran into this...

http://www.corral.net/forums/showthread.php?postid=3365569

can anyone confirm this?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 27, 2005
#4
  • Aug 27, 2005
  • #4
txstang84 said:
hey guys, while trying to find instructions on tps voltage adjustment, i ran into this...

http://www.corral.net/forums/showthread.php?postid=3365569

can anyone confirm this?
Click to expand...
Here is my take:
Within my understanding of the EEC, S+2B's is correct.

However, stangs were not engineered (I hope) with idle surge. So even though the puter should take care of baselining the TPS reading upon the throttle closing, I dont mind seeing people take 2 minutes to check or adjust theirs. It cant hurt in any way that I can tell, and has reportedly helped many.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 27, 2005
#5
  • Aug 27, 2005
  • #5
Oh yeah, here is some info on setting the TPS.

Good luck.
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Aug 27, 2005
#6
  • Aug 27, 2005
  • #6
HISSIN50 said:
...I dont mind seeing people take 2 minutes to check or adjust theirs. It cant hurt in any way that I can tell, and has reportedly helped many.
Click to expand...


agreed
 

The Shape

Founding Member
Jan 11, 2002
2,224
8
49
East ARKANSAS Delta
Aug 27, 2005
#7
  • Aug 27, 2005
  • #7
It can't hurt anything to put a meter on it, but I never checked mine after replacing it and it runs fine. I tend to agree with S&2 birds on this one. But like Hissin said it isn't gonna "hurt" anything to check it.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 27, 2005
#8
  • Aug 27, 2005
  • #8
FWIW, mine was set at 1.19 volts when I got it. I left it be; no codes.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 27, 2005
#9
  • Aug 27, 2005
  • #9
I did notice a difference in idle quality when I adjusted my tps from .88v to .99v


Maybe being high is ok, but being too low is bad?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 27, 2005
#10
  • Aug 27, 2005
  • #10
vristang said:
Maybe being high is ok, but being too low is bad?
Click to expand...
Quick - you call it. Heads or tails?

Seriously, I dont know. I really think it depends on each car - otherwise there would be a true magic number for the setting (0.97 is based upon the perceived throttle input threshold, not a magic best setting). Just my conjecture.
 
You must log in or register to reply here.

Similar threads

Engine Vacc leak detector
  • Creomod
  • Jul 19, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
215
Fox 5.0 Mustang Tech Jul 25, 2026
Mustang5L5
TPs sensors different?
  • Creomod
  • Sep 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
585
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 11, 2026
DadLife0724
W
Engine My engine dies after running 10 to 15 minutes under high heat.
  • Wylieone
  • Jun 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
295
Fox 5.0 Mustang Tech Jun 22, 2026
Mustang5L5
7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
844
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
M
Bad PCM?
  • MrPuffels
  • Jul 22, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
174
2005 - 2009 Specific Tech Jul 22, 2026
MrPuffels
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?