• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Requirements for Kenne bell supercharger, help!!

  • Thread starter Thread starter sil_stang02
  • Start date Start date Nov 21, 2005
  • 1
  • 2
Next
1 of 2 Next Last
S

sil_stang02

New Member
Oct 28, 2003
39
0
0
Northern Virginia
Nov 21, 2005
#1
  • Nov 21, 2005
  • #1
Hey guys I have a 2002 Gt 5 speed bone stock except for flowmaster 40 series and no cats. Im planning on installing a kenne bell 6 psi with no intercooler... Do I have to change anything else on the motor before installing ..... LIKE UPGRADES??? Or can I just install it and go? ANy comments would be greatly appreciated... Also does any one have one? If so how is it.....:SNSign:


Any opinions on where I can purchase one other than kennebell.com..

thanks
 

DocG

5th graders > me. They're not bant
Sep 25, 2005
8,297
1,358
194
Cincinnati area
Nov 21, 2005
#2
  • Nov 21, 2005
  • #2
Don't have a clue, but that avatar is gonna raise some flags on my work network!
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Nov 21, 2005
#3
  • Nov 21, 2005
  • #3
You can only buy KB blowers from Kenne Bell direct or from a shop that is part of their dealer net work. Period. They do not do internet 3rd party sales. And will terminate dealer status if a company does it.

You won't need any upgradeis you are doing the 6psi kit.
 

02LaserRed2V

New Member
Jul 30, 2004
379
1
0
Augusta, GA
Nov 21, 2005
#4
  • Nov 21, 2005
  • #4
Their kits are complete. It comes with everything you need, so have at it. I had only a Magnaflow catback and 4.10 gears when mine was installed.
 

my_03GT

New Member
Feb 9, 2003
186
0
0
DE
Nov 21, 2005
#5
  • Nov 21, 2005
  • #5
Yea the kit comes complete, I started off with the 6 psi kit, don't get me wrong it was great. If I were to do it again I would just keep saving up my money and buy the 9lb intecooled the first time, it was a pain in the butt to upgrade, basically had to install tear down and then install again....9lb with all the accesories rock!!!
 

Mossberg

Active Member
Jul 21, 2003
0
1
36
ATL, Shawty
Nov 21, 2005
#6
  • Nov 21, 2005
  • #6
Yeah, you can add a KB to a bone stock car since the kit is complete. Def get the 9lb kit.
 

MT1083

New Member
Sep 16, 2003
1,033
0
0
Charlotte, NC
Nov 21, 2005
#7
  • Nov 21, 2005
  • #7
Kit comes complete and you should be ready to go.
 
F

FalconGuy016

New Member
Oct 26, 2004
437
1
0
Northern VA
Nov 21, 2005
#8
  • Nov 21, 2005
  • #8
I want one for free
 
R

rpburnette

Member
May 22, 2003
152
0
16
Tampa, FL
Nov 21, 2005
#9
  • Nov 21, 2005
  • #9
I plan on getting a KB myself and I have come to the conclusion that I am going to get the 9lb kit instead of the 6lb and just get a real safe tune and maybe even run a 8lb pulley on it just to be safe. This is my daily driver, but one day, when I have enough money, I plan on forging the engine and than I can up the power safely. I had orginally thought about getting the 6lb and upgrading later, but I think with an ultra safe tune, I should be fine with the 9lb kit until I can build the engine. Sure the power will be down, but I would rather sacrifice some power than sacrifice the engine.
 

'13_ImpactBlue_GT

Angry Little Elf
Mar 30, 2005
872
2
98
Where the men are men and the sheep are nervous
Nov 21, 2005
#10
  • Nov 21, 2005
  • #10
sil_stang02 said:
Hey guys I have a 2002 Gt 5 speed bone stock except for flowmaster 40 series and no cats. Im planning on installing a kenne bell 6 psi with no intercooler... Do I have to change anything else on the motor before installing ..... LIKE UPGRADES??? Or can I just install it and go? ANy comments would be greatly appreciated... Also does any one have one? If so how is it.....:SNSign:


Any opinions on where I can purchase one other than kennebell.com..

thanks
Click to expand...

Get some suspension mods to get that xtra power to the ground: subframe connectors, STB, adj. lower control arms, adj. shocks and struts.
 

white99gt

Founding Member
Aug 8, 2000
4,649
1
0
stockbridge,Ga(near atlanta)
Nov 21, 2005
#11
  • Nov 21, 2005
  • #11
rpburnette said:
I plan on getting a KB myself and I have come to the conclusion that I am going to get the 9lb kit instead of the 6lb and just get a real safe tune and maybe even run a 8lb pulley on it just to be safe. This is my daily driver, but one day, when I have enough money, I plan on forging the engine and than I can up the power safely. I had orginally thought about getting the 6lb and upgrading later, but I think with an ultra safe tune, I should be fine with the 9lb kit until I can build the engine. Sure the power will be down, but I would rather sacrifice some power than sacrifice the engine.
Click to expand...


The KB comes with a tune.Why would you need to get another tune?

I agree with the others save up and do the 9psi intercooled setup first.
INtercooled boost is safer and lets you drive it harder without power loss due to the air heating up..

Hell on mine i see MAYBE 130* at wot after the blower..
 
R

rpburnette

Member
May 22, 2003
152
0
16
Tampa, FL
Nov 21, 2005
#12
  • Nov 21, 2005
  • #12
white99gt said:
The KB comes with a tune.Why would you need to get another tune?

I agree with the others save up and do the 9psi intercooled setup first.
INtercooled boost is safer and lets you drive it harder without power loss due to the air heating up..

Hell on mine i see MAYBE 130* at wot after the blower..
Click to expand...


Because no mail order tune, even if it is from KB, it won't be perfect. If I am going to spend several thousand dollars on my car, a couple hundred to make sure my tune is dead on won't matter. I understand that KB does a good job, but every car is different and will behave slightly different depending on mods, the car, and the climate inwhich the car is driven. I would also only take the car to a top tuner, and if that means driving several hours, than I think it would be worth it. Just trying to be cautious, call it cheap insurance, well maybe not that cheap

I also totally agree with getting support mods, such as suspension, that is why I can't get a forged motor, I have spent and will spend money so I can get the power to the ground.
 

GDawg

Founding Member
Mar 22, 2002
1,469
19
68
Nevada
Nov 21, 2005
#13
  • Nov 21, 2005
  • #13
Feb will be when I buy my 1.7 KB 9 psi with intercooler. comes with chip, injectors, (and I think) fuel pump and more... check out their website. Watch out guys! :SNSign:
 

chris kelvin

New Member
Sep 11, 2005
67
0
0
Nov 21, 2005
#14
  • Nov 21, 2005
  • #14
Lol, one required mod is a light right foot....
 

sgarlic

Founding Member
Apr 21, 2001
3,085
1
56
Nov 21, 2005
#15
  • Nov 21, 2005
  • #15
Doesn't include the fuel pump. It includes the boost-a-pump.
 

00s281sc368

New Member
Dec 14, 2003
532
0
0
Fremont, CA
Nov 21, 2005
#16
  • Nov 21, 2005
  • #16
One requires mod is just a better clutch... the stock GT cluch can't handle so much tq and will slip...
 

my_03GT

New Member
Feb 9, 2003
186
0
0
DE
Nov 22, 2005
#17
  • Nov 22, 2005
  • #17
rpburnette said:
Because no mail order tune, even if it is from KB, it won't be perfect. If I am going to spend several thousand dollars on my car, a couple hundred to make sure my tune is dead on won't matter. I understand that KB does a good job, but every car is different and will behave slightly different depending on mods, the car, and the climate inwhich the car is driven. I would also only take the car to a top tuner, and if that means driving several hours, than I think it would be worth it. Just trying to be cautious, call it cheap insurance, well maybe not that cheap

I also totally agree with getting support mods, such as suspension, that is why I can't get a forged motor, I have spent and will spend money so I can get the power to the ground.
Click to expand...


Alot of good points, just keep in mind your KB warranty is void once you get a custom tune...so if your 6,000 dollar supercharger ****s the bed, you will be paying out of pocket for it. There tune is pretty good, and definately safe.
 

Dan_Soprano

15 Year Member
May 7, 2003
7,410
54
129
Jacksonville, FL
Nov 22, 2005
#18
  • Nov 22, 2005
  • #18
00s281sc368 said:
One requires mod is just a better clutch... the stock GT cluch can't handle so much tq and will slip...
Click to expand...
my 01 GT's clutch held up fine all the way up to like 10,000 miles with the KB (9#) installed. It was still holding fine when I traded it in over a year ago for the Cobra.
 

GDawg

Founding Member
Mar 22, 2002
1,469
19
68
Nevada
Nov 22, 2005
#19
  • Nov 22, 2005
  • #19
sgarlic said:
Doesn't include the fuel pump. It includes the boost-a-pump.
Click to expand...

thanks... I didn't know that.
 
S

sil_stang02

New Member
Oct 28, 2003
39
0
0
Northern Virginia
Nov 23, 2005
#20
  • Nov 23, 2005
  • #20
thanks guys!!! Basically even if I do go with the 9 psi with intercooler, i dont need any other mods to the motor because the kit comes with everything, right????? And of course I will need some suspension upgrades to get the power to the ground....

And thats a good point about the tune. i dont want to get it tune and void the warranty...

Think it would be cheaper to replace the motor than the supercharger!!!
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

R
Kenne Bell Supporting Mods for 2002 GT?
  • Rembrant
  • Mar 25, 2025
  • SN95 4.6L Mustang Tech
Replies
3
Views
681
SN95 4.6L Mustang Tech Mar 25, 2025
Noobz347
R
Expired Kenne Bell 1.5L Supercharger – 1996–1998 Ford Mustang Cobra 4.6L SVT (4V)
  • rockhopperr
  • Jun 25, 2025
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
287
SN95 Mustangs For Sale (1994-04) Jul 7, 2025
Noobz347
J
For Sale 2003 mustang GT
  • jimted79
  • Mar 22, 2025
  • SN95 Mustangs For Sale (1994-04)
Replies
0
Views
572
SN95 Mustangs For Sale (1994-04) Mar 22, 2025
jimted79
J
C
Exhaust 4 Cats required for smog in California?
  • Codosuarus
  • Sep 28, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
1K
Fox 5.0 Mustang Tech Oct 6, 2025
Scottyding73
S
T
Fuel supercharged 5.0 kenne bell 2.1l
  • tazman1963
  • May 18, 2024
  • Fox 5.0 Mustang Tech
Replies
9
Views
1K
Fox 5.0 Mustang Tech May 19, 2024
tazman1963
T
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?