• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

reuse old pinion nut?

  • Thread starter Thread starter rockyracoon
  • Start date Start date Apr 7, 2006
R

rockyracoon

10 Year Member
Nov 23, 2005
874
27
49
margate NJ
Apr 7, 2006
#1
  • Apr 7, 2006
  • #1
Is a new one an absolute necessity?.I want to get my beast back on the road and I dont think I can get one locally.also is it ok if I used a different inner pinion bearing with the race thats in the housing.
 

crazypete

All my crevices are greased.
Oct 22, 2004
930
4
18
Arlington, MA
Apr 7, 2006
#2
  • Apr 7, 2006
  • #2
I have done both on two occasions in addition to reusing the crush sleeve and both gear installs went just fine with silent gears.

Just put lots of threadloc on the pinion nut so it doesnt back off.
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
Apr 7, 2006
#3
  • Apr 7, 2006
  • #3
you should be fine reusing the pinion nutz, like pete said if you use some loc tit. Im not sure about the inner pinion bearing. I put in all new bearing on the same chuck, my bro-inlaw does so many rear ends cuz the new f-150s that he did the whole job by feel. The thing is unbelieveably quiet too.
 

blackstangt

Member
May 31, 2004
460
1
19
ny
Apr 8, 2006
#4
  • Apr 8, 2006
  • #4
i dont see the problem, but everything i've read says to use a new one... so i'd be safe...
 

crazypete

All my crevices are greased.
Oct 22, 2004
930
4
18
Arlington, MA
Apr 8, 2006
#5
  • Apr 8, 2006
  • #5
supposedly the pinion nut's threads are designed to deform or something like that so when you tighten it down, it will never back off on it's own.

Sort like the crush sleeve. This is why you cannot reuse one. But if you take other precautions like loctite then you dont need the nut itself to be "locking", you provide the locking force through some other means.
 
You must log in or register to reply here.

Similar threads

O
8.8 Pinion Nut Leak
  • OX1
  • Jan 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 5, 2026
OX1
O
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
17
Views
1K
SN95 V6 Mustang Tech Aug 29, 2026
joeybuddy96
J
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
892
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
J
Exhaust manifold to Y-pipe nut & stud dimensions?
  • joeybuddy96
  • Jul 7, 2026
  • SN95 V6 Mustang Tech
Replies
2
Views
222
SN95 V6 Mustang Tech Jul 9, 2026
joeybuddy96
J
O
Progress Thread LTD-ing
  • OX1
  • Mar 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
533
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 6, 2026
OX1
O
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?