Rivet Question

S

savegoodautonfg

New Member

May 11, 2005

1,085

0

0

Mar 9, 2007

#1

• Mar 9, 2007

• #1

I bought the rivet kit from 50resto for the front bumper cover a while ago. Now, the rivets for some reason are a little too small when i put them thru the cover. I need slighter larger size. Does anyone know what size the 50resto.com one's are. I need to buy bigger ones?

Please help

Thanks in advance

-Nick

 

4G-KDMP

10 Year Member

Jul 23, 2005

935

19

39

CA

Mar 9, 2007

#2

• Mar 9, 2007

• #2

oe is 1/4"

 

S

savegoodautonfg

New Member

May 11, 2005

1,085

0

0

Mar 14, 2007

#3

• Mar 14, 2007

• #3

4G-KDMP said:

oe is 1/4"

Click to expand...

"OE"??

Also you have a link where i can buy a tad bigger ones?

 

Nibbie

New Member

Mar 10, 2007

127

0

0

Mar 14, 2007

#4

• Mar 14, 2007

• #4

"original equipment"
you can possbly get some at your local ford dealer or autoparts store.

 

Roland69

Sergeant Tangnet

Sep 17, 2005

2,867

3

58

Port Elgin, Ontario

Mar 14, 2007

#5

• Mar 14, 2007

• #5

NAPA should have them

 

vikingpower

New Member

Dec 6, 2004

656

0

0

CWU Ellensburg, WA

Mar 15, 2007

#6

• Mar 15, 2007

• #6

50 resto blows, dont buy stuff from them

 

S

savegoodautonfg

New Member

May 11, 2005

1,085

0

0

Mar 15, 2007

#7

• Mar 15, 2007

• #7

what size should i buy if i need them a lil bigger then 1/4" 50resto ones?

 

TomCat

New Member

Apr 19, 2005

412

0

0

Utah

Mar 15, 2007

#8

• Mar 15, 2007

• #8

5/16" if they make em =)

 

S

savegoodautonfg

New Member

May 11, 2005

1,085

0

0

Mar 16, 2007

#9

• Mar 16, 2007

• #9

TomCat said:

5/16" if they make em =)

Click to expand...

Or 3/8's right?

Question tho,

like on sears site it has this " Craftsman 1/8 x 3/8 in. Rivets, 15 pk."

Does that mean the part I need to be 3/8 is 3/8?

 

Shakerhood

20+ Year Stangneter

Oct 28, 2004

3,360

211

114

Ohio

Mar 16, 2007

#10

• Mar 16, 2007

• #10

Sounds like you need 1/4" Rivets and they require a special gun to pull them, you can snag one cheap from Harbor Freight

 

4G-KDMP

10 Year Member

Jul 23, 2005

935

19

39

CA

Mar 17, 2007

#11

• Mar 17, 2007

• #11

savegoodautonfg said:

Or 3/8's right?

Question tho,

like on sears site it has this " Craftsman 1/8 x 3/8 in. Rivets, 15 pk."

Does that mean the part I need to be 3/8 is 3/8?

Click to expand...

yep or even 3/8X1/2 but your gonna need a special rivet gun to do 3/8 rivets like shakerhood said.

 

S

savegoodautonfg

New Member

May 11, 2005

1,085

0

0

Mar 19, 2007

#12

• Mar 19, 2007

• #12

Anyone know where I can buy them direct?

 

4G-KDMP

10 Year Member

Jul 23, 2005

935

19

39

CA

Mar 19, 2007

#13

• Mar 19, 2007

• #13

1/4 or 3/8?

 

S

savegoodautonfg

New Member

May 11, 2005

1,085

0

0

Mar 19, 2007

#14

• Mar 19, 2007

• #14

1/4 are the 50resto ones..... i think you stated thatup above in this thread.

I guess i need 3/8"

 

Shakerhood

20+ Year Stangneter

Oct 28, 2004

3,360

211

114

Ohio

Mar 19, 2007

#15

• Mar 19, 2007

• #15

savegoodautonfg said:

1/4 are the 50resto ones..... i think you stated thatup above in this thread.

I guess i need 3/8"

Click to expand...

When you say too small do you mean they wiggle in the hole and the Diameter is not large enough?

 

vristang

15 Year Member

Mar 31, 2005

4,933

101

124

Seattle

Mar 20, 2007

#16

• Mar 20, 2007

• #16

Dang, that shouldn't be so hard...

If it were me, I would have gone down to Home Depot and picked up some carriage bolts by now.

Paint the heads and it would look cleaner than stock...

If you do this, I want to see pics!!!
jason

 

S

savegoodautonfg

New Member

May 11, 2005

1,085

0

0

Mar 20, 2007

#17

• Mar 20, 2007

• #17

vristang said:

Dang, that shouldn't be so hard...

If it were me, I would have gone down to Home Depot and picked up some carriage bolts by now.

Paint the heads and it would look cleaner than stock...

If you do this, I want to see pics!!!
jason

Click to expand...

Do you mean use carriage bolts instead of using rivets?

What size carriage bolts?

 

S

savegoodautonfg

New Member

May 11, 2005

1,085

0

0

Mar 20, 2007

#18

• Mar 20, 2007

• #18

Shakerhood said:

When you say too small do you mean they wiggle in the hole and the Diameter is not large enough?

Click to expand...

They either dont fit at all or wiggle in the hole.

 

vristang

15 Year Member

Mar 31, 2005

4,933

101

124

Seattle

Mar 20, 2007

#19

• Mar 20, 2007

• #19

savegoodautonfg said:

Do you mean use carriage bolts instead of using rivets?

What size carriage bolts?

Click to expand...

That is what I mean. Pull rivets are a pain in the @$$. I would prefer to buck rivets, and I really hate bucking rivets...

What ever size you need... I would guess 1/4" would be close

The beauty of doing custom stuff is that you get to make it up as you go...


jason

 

4G-KDMP

10 Year Member

Jul 23, 2005

935

19

39

CA

Mar 20, 2007

#20

• Mar 20, 2007

• #20

snug.. but not sloppy is how the rivet should feel