roller cam conversion

[sspnotcback]

ok i have a 351w that i want to switch out the flat tappet cam for a roller.i was looking on comp cams website for a roller conversion kit but the cam options listed all say not for efi. or computer compatable -no. its one of there street/strip extreme energy cams im sure some of you guys are running these in efi controlled cars right?

 

[88LX5.Oh]

As long as you're running a MAF system you will should be okay.

 

[sspnotcback]

Yes i have a mass air car.do you guys think 30lb injectors are to much for a 357w

 

[88LX5.Oh]

No 30 lb injectors are fine as long as you get a MAF sensor calibrated for the 30 lb injectors.

 

[84Ttop]

Worst case, if you choose some totally outlandish cam you will just need the car to be tuned, no biggie..