Does anyone have a rotisserie either purchased one or made one yourself, if you would please post some detailed pictures and/or your drawing of the design. Or does anyone have any other options to work on the underside, and no I don't have or have access to a lift.
Last summer, I had intentions of building my own rotisserie. However, after pricing the steel to build it out of, just the cost of the steel was going to be over $1,500.00 and I would still have had to cut everything to length and drill and weld where necessary. --the $1,500.00 for the steel was also before the cost of the (6) casters I would need, two hydraulic lift cylinders, bolts, post pins, primer, paint, etc.
I looked on eBay and found this company and bought their rotisserie instead. It was around $1,050.00 delivered to me. --It was their "Mobile Adjustable Height, Jacks, 5" Casters" model I bought.
Sparky, here's a Rotissary you might look into. I've been searching for one for myself too, and although I haven't made up my mind yet, this is one that I'm considering. Roto 2000 - Auto Rotisserie / Car Rotisserie It comes with all kinds of options. It may cost more than others that are available, but with all the options, it may be worth it. Good Luck!!!