• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

rough idle, hard to get going, wants to stall in lower RPMs

  • Thread starter Thread starter No.11
  • Start date Start date Mar 4, 2010

No.11

10 Year Member
Oct 13, 2009
614
10
48
Los Angeles
Mar 4, 2010
#1
  • Mar 4, 2010
  • #1
So after I put the motor mounts in, the car was fine. After a couple days I noticed that when I started the car it would idle really bad, going down to like 300 RPM and spiking up to 1200, and sometimes turning off at the lower point. Once it warms up it stays more constant but I can still tell it's not idling correctly. I also hear something that sounds like air escaping. Sounds like it may be coming from under the upper intake. It also smells of fuel not only from the exhaust but also in the engine bay.

Even before this problem, it always turned right off as soon as I turn it on when it's cold, but I just had to hold the gas a little and it would even out.

One of my spark plug wires had been burned a little from touching the header so I thought that was the problem. I went out and bought new Ford Racing 9mm blue wires and new spark plugs and set to a gap of .050. All said and done, the problem continued so now I'm stumped. Anyone got any idea what it could be? Maybe a came loose somehow? I would really appreciate the help as I am very eager to take her out on the road again. Thanks a lot!
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Mar 4, 2010
#2
  • Mar 4, 2010
  • #2
sounds like a vacuum line broke or came off. Follow all the lines coming off the tree and make sure they are hooked up on the other end.
 

No.11

10 Year Member
Oct 13, 2009
614
10
48
Los Angeles
Mar 4, 2010
#3
  • Mar 4, 2010
  • #3
stykthyn said:
sounds like a vacuum line broke or came off. Follow all the lines coming off the tree and make sure they are hooked up on the other end.
Click to expand...

I will check that out today since I get out of school early YEAH!

Thanks.

Also I found the surging idle checklist hehehe...guess I should have looked for that first.
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Mar 4, 2010
#4
  • Mar 4, 2010
  • #4
I'd bet my next paycheck you have a broken vacuum line
 

No.11

10 Year Member
Oct 13, 2009
614
10
48
Los Angeles
Mar 4, 2010
#5
  • Mar 4, 2010
  • #5
stykthyn said:
I'd bet my next paycheck you have a broken vacuum line
Click to expand...

Even I hope you're right even if I would get your next paycheck if you were wrong. I want this car on the road!
 
You must log in or register to reply here.

Similar threads

B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
278
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
L
Engine Why won't the motor start if I have spark and fuel
  • LeviAnderson
  • Nov 20, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
430
Fox 5.0 Mustang Tech Nov 20, 2025
AeroCoupe
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
795
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
316
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?