• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

runs choppy when in reverse.

  • Thread starter Thread starter DissFigured
  • Start date Start date Apr 16, 2006

DissFigured

New Member
Apr 26, 2005
320
0
0
Dallas, TX
Apr 16, 2006
#1
  • Apr 16, 2006
  • #1
Saturday, I put the car up on ramps on both left wheels only just to look at the parking brake linkage. I didn't touch a thing but it was up on the ramps for about 6 hours.

I took it off the ramps.

Now, when I put it in reverse, it runs choppy. like rolls a foot then jerks, rolls a foot jerks etc etc etc. I put it in neutral and went down a hill backwards. Very smooth.

So, my assumption is the transmission has an issue. I have an FMX by te way.
Any thoughts?

Could some odd angled stress from having the left site on ramps affect the car in anyway?
 
R

Ronstang

New Member
Apr 4, 2004
1,294
0
0
Houston Texas
Apr 17, 2006
#2
  • Apr 17, 2006
  • #2
Check your passenger side motor mount. Hell, check both while you are down there.
 

DissFigured

New Member
Apr 26, 2005
320
0
0
Dallas, TX
Apr 17, 2006
#3
  • Apr 17, 2006
  • #3
More info please...

What exactly am I looking for? What do you think is the issue?

Thanks.
 
R

Ronstang

New Member
Apr 4, 2004
1,294
0
0
Houston Texas
Apr 17, 2006
#4
  • Apr 17, 2006
  • #4
It sounds like your passenger motor mount is broken and thus when in reverse the engine tries to lift on that side. Put a floor jack under the oil pan with a board between the two and carefully and slowly jack up on the oil pan and watch to see if the motor mount is broken. If it is it will be noticeable rather quickly.
 

DissFigured

New Member
Apr 26, 2005
320
0
0
Dallas, TX
Apr 18, 2006
#5
  • Apr 18, 2006
  • #5
I checked the motor mounts, and they look fine.
Any other ideas.

It appears to somehow be related to being in reverse. Wether I give it gas or not, it has this effect. I can idle backwards and it feels like something is catching every couple of feet.
 

pabear89

Active Member
Apr 15, 2003
2,126
0
46
High in the Hills of So Ca with the Voices in My H
Apr 18, 2006
#6
  • Apr 18, 2006
  • #6
Check your rear brakes for dragging in rev.
Jack up the rear and turn your wheels like your backing,
the drums are prob catching one of the brakeshoes.

PB
 
R

Ronstang

New Member
Apr 4, 2004
1,294
0
0
Houston Texas
Apr 19, 2006
#7
  • Apr 19, 2006
  • #7
Did you check the tranny mount too?
 

DissFigured

New Member
Apr 26, 2005
320
0
0
Dallas, TX
Apr 29, 2006
#8
  • Apr 29, 2006
  • #8
pabear89 said:
Check your rear brakes for dragging in rev.
Jack up the rear and turn your wheels like your backing,
the drums are prob catching one of the brakeshoes.

PB
Click to expand...


My assumption is that if this were the case, I would have the issue even when in neutral..

It is only happening when in reverse. sounds like something is catching w/ every revolution. very jerky. D 1 2 and 3 are fine though.

I may have to take it in to a shop and have someone else drive it.
 

DissFigured

New Member
Apr 26, 2005
320
0
0
Dallas, TX
May 22, 2006
#9
  • May 22, 2006
  • #9
Advice

I took it to Eagle Transmission. They said they would look at it for no charge.
After a couple days the guy says "Yup, it is the transmission but it seems to be an internal issue" Duh.

He wants to charge me 280.00 to open it up and look at it but that will go toward the repair cost. He estimated that it could be as low as $300-$400 if it is a revers servo piston or something like that or up to $1200 if they have to rebuild it.

I don't have $1200 right now. I don't want to spend the 280 for him to tell me it is $1200 and I end up telling him to put it back together and I have just lost $280.

Any thoughts on what I should do? Should I garage it and save up for a C4 or something? If so, what should that cost me? Are there other options?

Ever since I got this car people have been saying to me "Oh, an FMX those are tough as nails" I am not sure that is the case.
 
P

PJx5x

Member
Mar 30, 2005
197
0
16
Chicago
May 22, 2006
#10
  • May 22, 2006
  • #10
Just to let you know, I got a C4 for sale if you want it (with bellhousing and flexplate) $400. Located in 60645.
 
S

Stanger'66

Member
Apr 30, 2006
31
0
6
May 22, 2006
#11
  • May 22, 2006
  • #11
That transmission place is high. I just had my C4 looked at for $50.00 that went toward the rebuild that only cost $200.00. The whole tranny was rebuilt for $200 and the guy said to bring it back if we had any questions or problems, realizing that service can be a factor in price. I would avoid him, find a local guy that doesn't have alot of overhead or advertising. The best are usually the ones you just "hear about" at a cruise night or something.
 
You must log in or register to reply here.

Similar threads

K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
2K
Other Auto Tech Jun 13, 2026
427nostang
4
spark plug boot
  • Bree
  • Sep 1, 2021
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 7, 2021
Bree
M
Transmission issue?
  • Mustmarshall
  • Jul 30, 2018
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
747
1965 - 1973 Classic Mustangs -General/Talk- Aug 3, 2018
horse sence
S
Engine Problems After Head Gasket Job. Please Help!!!
  • Str8hp
  • Dec 27, 2015
  • Fox 5.0 Mustang Tech
Replies
7
Views
4K
Fox 5.0 Mustang Tech Dec 30, 2015
Str8hp
S
A
Random Stalling At Stop Lights And When Idling
  • Adam_2006Tungsten Gray
  • Jul 19, 2014
  • 2005 - 2014 Specific V6 Tech
Replies
1
Views
8K
2005 - 2014 Specific V6 Tech Jul 19, 2014
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?