Roush S351 Balancer Question

[SorsCode]

I know Saleen used 351W Truck Engines or whatnot... My question is did they use the Balancer from the 94-96 Balancer? What did they use. Friend of mine is asking me and I didn't know.

Thanks for the help..
Danny

 

[S351R"Animal"]

They used a stock truck balancer. 28 oz. Its best to upgrade though.

 

[SorsCode]

no spacer need correct?? Me i'm using an Explorer Balancer but my rotating assembly is balanced for 50oz.

 

[stang95silv]

 

[SorsCode]

^
|
\ _ _ _ _ _ _ Speak of the devil there is the person wondering.





Me to actually, But i'm helpin build the enigne.

 

[stang95silv]

Is a spacer needed then when using the truck balancer and 94-95 gt accessory brackets?

 

[S351R"Animal"]

No spacer is needed. The only time you need a spacer should be when using some of the sfi or Motorsports balancers. Why the 50 oz balance.

 

[SorsCode]

Animal I went 50oz so I can run an Explorer Balancer. I'm setting my 408 up with a Coil on Plug ignition. Which I got the wiring about done. I need the Explorer Balancer for the Crank sensor, Using a 99+V6 Cam Sensor since it has the right 5/16 shaft, and using a 4.6L Crown Vic EDIS8 Ignition Module to run the big old mess. All this for no Spark Plug Wires.