safe @ 6,500 rpm?

[rickd93_lx]

tell me will this valve train handle 6500 rpm

trk flow track heat top end kit
http://store.summitracing.com/partdetail.asp?part=TFS-K514-360350B&view=128&N=700+0&orig=1&FROM=MG

hardene pushrods
frrp perfomance dampner
crane lifters with check valves

kit says 360@ 6500 but is that safe

oh yeah it is going on a 95 cobra short block stock

 

[304billet]

There is no reason to take this kit to 6500rpm. u will max out @ 5500-6000. I shift @ 6000, have pretty big HR and my power drops off after 6000.

I seriously doubt wheteher that valvetrain can handle 6500 all the time. This is an entry level kit.

 

[joeyd0730]

:Word: :Word: i agree

 

[vikingpower]

I've got those heads and I'm going to have to upgrade the valvesprings when I put my Victor manifold on; not worth taking the chance of floating the valves and tagging a piston

 

[tording]

I agree. There is no reason to take that kit above 6000 rpm as it will fall off hard at that point. I ran the same kit and never shifted above 6k.