• Mustang Forums
  • Special Production

Roush saleen or C6 vette?

  • Thread starter Thread starter saleen556
  • Start date Start date Apr 24, 2006
  • 1
  • 2
Next
1 of 2 Next Last
S

saleen556

New Member
Dec 2, 2003
387
0
0
Hillsboro,OR
Apr 24, 2006
#1
  • Apr 24, 2006
  • #1
I was curious how it might go up to say 120?I just had it tuned and put down 404/428.Feels real strong but vettes always intimidate me.
 

Mstng2

Founding Member
Jun 27, 2002
789
5
19
- - Zion - -
Apr 24, 2006
#2
  • Apr 24, 2006
  • #2
So you want 520 HP or so? Go 600 just to be safe, Me thinks you should contact MPH Mustangs, Kenne belle 2.2, Forged guts, and 20 pnds boost! Maybe even twin turbos...
 
S

saleen556

New Member
Dec 2, 2003
387
0
0
Hillsboro,OR
Apr 24, 2006
#3
  • Apr 24, 2006
  • #3
Mstng2 said:
So you want 520 HP or so? Go 600 just to be safe, Me thinks you should contact MPH Mustangs, Kenne belle 2.2, Forged guts, and 20 pnds boost! Maybe even twin turbos...
Click to expand...
Already working on it.I am dealing with a local vendor for MMR and am planning on the 900 shortblock.Then will either upgrade to the 2.2 or just add a little NOS to top it off.
 

marcus95

Active Member
Jan 26, 2004
2,133
0
46
California
Apr 25, 2006
#4
  • Apr 25, 2006
  • #4
saleen556 said:
Already working on it.I am dealing with a local vendor for MMR and am planning on the 900 shortblock.Then will either upgrade to the 2.2 or just add a little NOS to top it off.
Click to expand...






Or.....

Just step off the deep end and plop down some dough on a C6 ZO6.
 

EDGE Motorsport

Member
Sep 24, 2004
561
2
19
Saleen S281, London, UK
Apr 25, 2006
#5
  • Apr 25, 2006
  • #5
a buddy of mine just bought a c6 zo6... nice car but i dont care much for the noise it makes... sounds very harsh and raspy... but thats just my opinion, others love the sound...

quick though !!!



EDGE
 

129saleen

New Member
Sep 1, 2004
124
0
0
Houston, TX
Apr 25, 2006
#6
  • Apr 25, 2006
  • #6
I finally got to race a c6 last wednesday and it didnt turn out to be much of a race...I was going about 135, looked in my mirror and saw that the corvette was about 7 or 8 cars back trying to catch up... It was fun though..
 
S

saleen556

New Member
Dec 2, 2003
387
0
0
Hillsboro,OR
Apr 25, 2006
#7
  • Apr 25, 2006
  • #7
129saleen said:
I finally got to race a c6 last wednesday and it didnt turn out to be much of a race...I was going about 135, looked in my mirror and saw that the corvette was about 7 or 8 cars back trying to catch up... It was fun though..
Click to expand...
What kind of power are you making on 10lbs?I have seen guys making more HP than me on 9lbs.Even with the eaton m90 and chicane pulley I was only at 333/348.I am hoping after I add the forged SB,heads and cams I can get close to 500/500 on pump gas.
 

129saleen

New Member
Sep 1, 2004
124
0
0
Houston, TX
Apr 25, 2006
#8
  • Apr 25, 2006
  • #8
My car doesnt make that much power...It only made 366rwhp and 392rwtq but it only shows its making 5lbs of boost...The block is in its break in period so they didnt tune it hard...I am finally past the break in miles but now I dont have any money to get it tuned with the 14 lb pulley...
 

marcus95

Active Member
Jan 26, 2004
2,133
0
46
California
Apr 25, 2006
#9
  • Apr 25, 2006
  • #9
129saleen said:
I finally got to race a c6 last wednesday and it didnt turn out to be much of a race...I was going about 135, looked in my mirror and saw that the corvette was about 7 or 8 cars back trying to catch up... It was fun though..
Click to expand...



That would be about right for a stock C6. If it were a ZO6 bearing down on you it wouldhave been a different story.

I agree. You should be putting down some highers nums with the KB 1.7. Awesome blower for the money. Once you get past your safe tune and double your boost you will be really happy.
 
S

saleen556

New Member
Dec 2, 2003
387
0
0
Hillsboro,OR
Apr 25, 2006
#10
  • Apr 25, 2006
  • #10
129saleen said:
My car doesnt make that much power...It only made 366rwhp and 392rwtq but it only shows its making 5lbs of boost...The block is in its break in period so they didnt tune it hard...I am finally past the break in miles but now I dont have any money to get it tuned with the 14 lb pulley...
Click to expand...
What compression did you go with on the new SB?What octane fuel do you have there in texas?94?
 
S

saleen556

New Member
Dec 2, 2003
387
0
0
Hillsboro,OR
Apr 25, 2006
#11
  • Apr 25, 2006
  • #11
marcus95 said:
That would be about right for a stock C6. If it were a ZO6 bearing down on you it wouldhave been a different story.

I agree. You should be putting down some highers nums with the KB 1.7. Awesome blower for the money. Once you get past your safe tune and double your boost you will be really happy.
Click to expand...
The Z06 is sweet.But a 2.2 or a twin turbo under a saleen will give one a good run.
 

wsbrigham

New Member
Jun 2, 2005
320
0
0
Albuquerque, New Mexico
Apr 25, 2006
#12
  • Apr 25, 2006
  • #12
I raced a C6 Z06 the other day several times and put no less than 10 cars on him running up to around 170 MPH in the '05.
The car definitely gets good traction, though. It was a struggle to stay with him down low because of how well the car hooked-up.

BTW
The guy down the street from me (the guy that also has a S7) blew his C6 Z06 with 800 miles on it (melted the piston) - not too impressive IMO.
 

marcus95

Active Member
Jan 26, 2004
2,133
0
46
California
Apr 25, 2006
#13
  • Apr 25, 2006
  • #13
Billy,

I want to get this straight. You pulled 10 car lengths on a new 06 ZO6 up to 170mph in your 3 valve Vortech blown car???

I have driven a handful of 91 octane tune sct blown 3 valves here, with the new t trim and I didn't see that kind of power. One was running 11 lbs.

Just want to make sure I read your post correct.
 

03-s281

New Member
Jan 20, 2004
421
0
0
Stangville,TN
Apr 25, 2006
#14
  • Apr 25, 2006
  • #14
I call BS on both of you that said you pulled LENGTHS on a C6 Z06. I have seen a couple at the track BONE STOCK trapping 125 and running high 11's. No way a blown 10lbs 2V or a blown HEAVY 05-06 will pull a new Z06.
 

PonyboyIsaac

New Member
Aug 20, 2004
79
1
0
Apr 25, 2006
#15
  • Apr 25, 2006
  • #15
this thread is getting good....
 

129saleen

New Member
Sep 1, 2004
124
0
0
Houston, TX
Apr 25, 2006
#16
  • Apr 25, 2006
  • #16
well if your calling me a liar well you can ask the C6 that got his ass kicked... I never said I raced a Z06 for one thing and why would i lie about racing a damn car? Am I trying to impress anyone? NO...I am just answering the guys question..I just cant wait till the car has the 14lb. pulley and the 150 shot of gas...Then you can call BS again...

My compression is 8.5:1 and my gas is 93oct.
 

marcus95

Active Member
Jan 26, 2004
2,133
0
46
California
Apr 26, 2006
#17
  • Apr 26, 2006
  • #17
PonyboyIsaac said:
this thread is getting good....
Click to expand...








 

wsbrigham

New Member
Jun 2, 2005
320
0
0
Albuquerque, New Mexico
Apr 26, 2006
#18
  • Apr 26, 2006
  • #18
03-s281 said:
I call BS on both of you that said you pulled LENGTHS on a C6 Z06. I have seen a couple at the track BONE STOCK trapping 125 and running high 11's. No way a blown 10lbs 2V or a blown HEAVY 05-06 will pull a new Z06.
Click to expand...

Looking on the surface you have a valid observation. However, there are many factors that come into play on each individual race:

1. Driver skill level

2. 130 more rwhp to the ground (stock Z06 = 427 RWHP; my '05 = 558 RWHP on 91 octane gas) - this factor is irrelevant if you can't drive the car

3. Tires, tires, tires

4. Gearing

Weekly, I race cars that have 700-800 rwhp and beat them because of the reasons above, exluding #2, and reason #1 and #3 being the biggest factors.
Pure HP doesn't dictate how fast a car is, but can give an idea. Ultimately, it is how the entire car and driver work together. There are plenty of 9 second cars in this world with 14 second drivers........
 

Cali 281SC

New Member
Sep 30, 2005
95
0
0
Apr 26, 2006
#19
  • Apr 26, 2006
  • #19
Woo hoo! JERRY JERRY JERRY
 

s351rspeedster

New Member
Mar 12, 2004
787
1
0
Southern California
Apr 26, 2006
#20
  • Apr 26, 2006
  • #20
.....Can't we all just get along??????
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

D
Engine HO cam in non HO roller block ‘93 f150
  • DanC1993f150
  • Mar 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
325
Fox 5.0 Mustang Tech Mar 29, 2026
General karthief
L
2001 cobra sequential tail lights
  • lking78
  • May 26, 2026
  • SVT Tech Forum
Replies
4
Views
166
SVT Tech Forum Jun 14, 2026
lking78
L
P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
296
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
C
C4 trans help needed
  • CPH89LX
  • Apr 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
207
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2026
CPH89LX
C
R
New Member, needs help with built '04 engine
  • rollo19
  • Aug 6, 2025
  • The Welcome Wagon
Replies
1
Views
150
The Welcome Wagon Aug 6, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • Special Production
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?