San Diego Guys

M8KMDAY · May 18, 2004

Hi Guys;
Just wanted to find out if you would be interested in a DYNO Day sometimes next month?
You can reply to this post, send me an email or contact L8 MUSL

Thanks and hope will have a good turn out
Pierre

L8 MUSL · May 18, 2004

OH O! watch out guy's!
Pierre has discovered Stangnet.
What is that "M8KMDAY", some sorta French err sumptin?
You can count me in.
Since he wasn't so clear, let me help explain my friends intensions. He was going to get some commitment from us and then reserve the Dyno up at JBA. We could all cruise up there and spend some quality dyno time together

allen2oo3 · May 18, 2004

count me in

M8KMDAY · May 18, 2004

we can do JBA , but I was thinking of BBK

M8KMDAY · May 18, 2004

BBK (aka Brother's Performance)

Beau · May 18, 2004

count me in..i need to get the snake dyno'd

SonicBlue2v03GT · May 18, 2004

Count me in too. I was never able to make that dyno day the other week. Still need to get some #'s for my stang. If JBA will cut us a deal, they got my vote. I remember Beau saying that the dyno at JBA is generous with the #'s

Beau · May 18, 2004

lol VERY generous.

so i should expect like 320 rwhp or something

sstrayer · May 19, 2004

Dyno Shop in Santee is having a dyno day. They also post your dyno info online too which is nice.

Date: Sat: 06-19-2004
Dyno Shop: The Dyno Shop
Address: 10042 Prospect Avenue - Santee, California 92071
Phone: 888-DYNO-SHOP
Website: http://www.thedynoshop.com
Cost: $40
Dyno Used: Dynojet 248c [this dyno supports rear and front wheel drive vehicles only - sorry no diesels!]

Details: 2 consecutive dyno pulls w/ air fuel ratio readouts
Sign Ups: 14 / 30

L8 MUSL · May 19, 2004

Hey Shaun, where were you for our cruise?
Yeah, sorry guy's Pierre did say Brothers and I typed JBA.
I did kinda want to check out the Brothers shop but I say whoever will give us the best deal and who can burn me a custom chip so that I can bail on this FMU.

M8KMDAY · May 19, 2004

Bill
If you need a chip, you may want to look into TwEECer or AFM's FMU and I heard that Summit also has a Fuel Management System. You're looking around 349 $ to 900 $ approx. depending on the system, I've got the TwEECer RT for the LX (I use my laptop with it) I've got the link if you are interested!

YELLOW42RCODE · May 19, 2004

DYNO DAY

Hey guys,
yuo can definatley count me in for this. I want to set the record straight on JBA'S dyno it is not generous ! it is very stingy about 8% to be exact
Brothers Performance in Corona is a little better so either that or the place in Santee would work. See ya.

Fred

John89lx · May 19, 2004

I've had mine dynoed at The Dyno Shop in Santee a couple of times. When they have their dyno days it's usually $40 for two pulls with air/fuel data. I don't know how many cars minimum you need for a group deal. Give them a call.

Beau · May 19, 2004

YELLOW42RCODE said:
Hey guys,
yuo can definatley count me in for this. I want to set the record straight on JBA'S dyno it is not generous ! it is very stingy about 8% to be exact
Brothers Performance in Corona is a little better so either that or the place in Santee would work. See ya.

Fred

hmmmm so my GT really did have 272 rwhp and 283 rwtq....damn wtf did i get this cobra for

YELLOW42RCODE · May 19, 2004

Beau

1990StangLX said:
hmmmm so my GT really did have 272 rwhp and 283 rwtq....damn wtf did i get this cobra for

My Cobra made 465 rwhp / 497 ftlb tourque but on the dyno in Santee it made 482 rwhp

Fred

Beau · May 19, 2004

YELLOW42RCODE said:
My Cobra made 465 rwhp / 497 ftlb tourque but on the dyno in Santee it made 482 rwhp

Fred

wow! I can't wait to dyno my cobra if we go to Santee.

SCORPION · May 19, 2004

I'm in......

This will be "Rim Job's" first dyno so I am kinda stoked but at the same time going to totaly embarass myself especially with Fred dropping numbers like that....damn

Dominus_Servi · May 19, 2004

Count me in too. I would like to know what my car is pulling stock. Though Im doing my best to keep my hopes down.

L8 MUSL · May 19, 2004

1990StangLX said:
wow! I can't wait to dyno my cobra if we go to Santee.

Remember, all Cobra's are not created equal

L8 MUSL · May 19, 2004

I will not be getting a chip burnned before I replace my heads so, the cheaper the dyno time the better.
I'd just be doing it for base numbers and to see my A/F ratio (which as Fred has pointed out smells fat). So the Santee place might be the call.

San Diego Guys

M8KMDAY

New Member

L8 MUSL

Active Member

allen2oo3

M8KMDAY

New Member

M8KMDAY

New Member

Beau

SonicBlue2v03GT

New Member

Beau

sstrayer

L8 MUSL

Active Member

M8KMDAY

New Member

YELLOW42RCODE

Member

John89lx

New Member

Beau

YELLOW42RCODE

Member

Beau

SCORPION

New Member

Dominus_Servi

New Member

L8 MUSL

Active Member

L8 MUSL

Active Member

Similar threads

San Diego Guys

New Member

Active Member

New Member

New Member

New Member

Active Member

New Member

Member

New Member

Member

New Member

New Member

Active Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency