Scat 331 Stroker Rotating Assembly, H-Beam Rods, Probe Pistons, Built for Boost!

Status
Not open for further replies.

RyanSG

Founding Member
Oct 24, 2002
286
0
17
Allentown, Pa
I have the parts listed individually but I figured I would add them as a kit and see if anyone wants to go that route. Heres the info!
Everything Shipped for $500.00

The rotating assembly came out of my Mexican block based turbo stang. I made 595RWHP on the setup with a T67 Turbo. It's balanced to 28oz, and the matching dampner is for sale as well if your interested.

The crank is in great condition and has never been damaged or cut down etc. I'm the only owner and it's only been in one block. Pro installed etc, the only thing i've touched was to remove it and clean it up/re oil it down for safe keeping. The specs are in the link from summit racing.
SCAT Engine Components 93023 - Scat Cast Crankshafts - Overview - SummitRacing.com

Rods:
They are Scat, 4340 H-beam rods, 5.4" Length with ARP bolts. Perfect condition.
http://www.probeindustries.com/Produ...Show=TechSpecs

Pistons:
Probe SRS Race series, T-61 forged aluminum pistons, .030 over bore. Floating wrist pins. -14.2 CC dish with the twisted wedge cut pistons, which will also fit a regular heads as well, the twisted wedge cut just allows them to be fit to the TW heads. One of the pistons is currently damaged so you'll need 1 new piston. Last I looked for rings and 1 piston from Probe it was $120 for the rings+piston. I paid $477.00 New for the set. http://www.probeindustries.com/Produ...Show=TechSpecs

View attachment 231984
View attachment 231985
View attachment 231986
View attachment 231987
View attachment 231988
View attachment 231989
View attachment 231990
View attachment 231991
View attachment 231992
View attachment 231993
View attachment 231994
View attachment 231995
View attachment 231996
View attachment 231997
 
  • Sponsors (?)


Status
Not open for further replies.