• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Screwed up MSD 6aL

  • Thread starter Thread starter SmockDoiley
  • Start date Start date Sep 17, 2005
S

SmockDoiley

New Member
Jun 14, 2003
1,591
2
0
San Diego, CA
Sep 17, 2005
#1
  • Sep 17, 2005
  • #1
So Im having some issues with my ignition and I thought maybe you all could help me. Im getting 12v to the small red switched wire, and Im getting 12v to the pos and neg of the coil. The coil is new and this combo has worked before. Now its not starting, and Im getting gas. Ive followed the troubleshooting by MSD and the car is getting no spark to the dizzy. Also, Ive found that the 6al only works when the large black ground wire is NOT grounded. I'm pretty sure the box is fried. What do you think?
 

notchback

Founding Member
May 30, 2000
1,950
0
36
St Clair Shores MI
Sep 17, 2005
#2
  • Sep 17, 2005
  • #2
are you using the tps harness or hard wired in?

and do you have the heavy red and black BOTH going to the battery?

did this combo work b4 and now is not? or is something recently added and this combo never worked?
 
S

SmockDoiley

New Member
Jun 14, 2003
1,591
2
0
San Diego, CA
Sep 18, 2005
#3
  • Sep 18, 2005
  • #3
OK, combo has worked before in 2 different engine setups. Its an 85 and carbed so nix the fuelie talk. I have the large red going to the starter solenoid since that is the same as the battery and its worked before. I have the large black going to the engine ground where the neg. cable grounds. Again, it would be the same as straight to the battery and its worked before. Problem is, the box only works if the negative isnt touching anything. I only get juice to the coil when the box is NOT grounded.
 
S

SmockDoiley

New Member
Jun 14, 2003
1,591
2
0
San Diego, CA
Sep 18, 2005
#4
  • Sep 18, 2005
  • #4
Cant find any info on ohms checking an MSD blaster coil, but the ohms coming from the dizzy check so the mag. pickup is good.
 

bobcatv8

Member
Aug 25, 2004
141
1
16
Ocala,FL
Sep 18, 2005
#5
  • Sep 18, 2005
  • #5
If you fried it you can send it to MSD and they will rebuild it with the latest updates for much less than a new one. I bought a $10 swap meet 6AL and had MSD go through it. Worked great for years at 1/2 the price of a new one. Still working on my wagon 12 years later.
Been there, done that!
 

OonDeanisS

Founding Member
Jun 16, 2002
902
1
19
Danbury, CT
Sep 18, 2005
#6
  • Sep 18, 2005
  • #6
Mine only sparks after i let the key back to run from start. Is that something i should send it to MSD for? Sometimes it doesnt even spark and the carb sneezes.
 
S

SmockDoiley

New Member
Jun 14, 2003
1,591
2
0
San Diego, CA
Sep 18, 2005
#7
  • Sep 18, 2005
  • #7
I think mine has an internal short or ground so it doesnt need to have a ground because it already has one, lol.
 

notchback

Founding Member
May 30, 2000
1,950
0
36
St Clair Shores MI
Sep 18, 2005
#8
  • Sep 18, 2005
  • #8
yeah i'd say send it in for sure.

some performance shops will test as well, but sounds like it needs to go in for sure.
 
You must log in or register to reply here.

Similar threads

8
Electrical Crank-no start ... no spark ... no injector pulse, was it something I did? (redux)
  • 85gtCOBRA
  • Oct 28, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
680
Fox 5.0 Mustang Tech Oct 29, 2025
85gtCOBRA
8
Resolved Wiring electric fan
  • cbac89
  • Aug 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
233
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
cbac89
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
475
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Electrical Looking for Constant 12 v
  • cbac89
  • Oct 26, 2024
  • Fox 5.0 Mustang Tech
Replies
0
Views
323
Fox 5.0 Mustang Tech Oct 26, 2024
cbac89
P
Electrical MSD box wiring for an 88 GT- few questions.
  • pindude80
  • Jul 20, 2024
  • Fox 5.0 Mustang Tech
Replies
3
Views
1K
Fox 5.0 Mustang Tech Jul 25, 2024
pindude80
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?