Screwed up MSD 6aL

SmockDoiley

New Member
Jun 14, 2003
1,591
2
0
San Diego, CA
So Im having some issues with my ignition and I thought maybe you all could help me. Im getting 12v to the small red switched wire, and Im getting 12v to the pos and neg of the coil. The coil is new and this combo has worked before. Now its not starting, and Im getting gas. Ive followed the troubleshooting by MSD and the car is getting no spark to the dizzy. Also, Ive found that the 6al only works when the large black ground wire is NOT grounded. I'm pretty sure the box is fried. What do you think?
 
OK, combo has worked before in 2 different engine setups. Its an 85 and carbed so nix the fuelie talk. I have the large red going to the starter solenoid since that is the same as the battery and its worked before. I have the large black going to the engine ground where the neg. cable grounds. Again, it would be the same as straight to the battery and its worked before. Problem is, the box only works if the negative isnt touching anything. I only get juice to the coil when the box is NOT grounded.
 
If you fried it you can send it to MSD and they will rebuild it with the latest updates for much less than a new one. I bought a $10 swap meet 6AL and had MSD go through it. Worked great for years at 1/2 the price of a new one. Still working on my wagon 12 years later.
Been there, done that! :)