seat belt reciever

Seat belt sleeves are actually pretty easy to install. Scoot the seat all the way forward & you'll see the bolt that holds on the buckle. Grab a 3/8 rachet & a t-50 torx socket & remove the bolt. Simply pull the old sleve off the buckle. To install the new one feed a string in through the top of the sleeve & pull it out through the bolt hole. Leave enough on the top side to tie to the bolt hole on the buckle. Start the buckle in to the sleeve & use the string to pull it all the way in. Remove the string & bolt the buckle back in to the car. Done!