I own a 2005 GT which had a salvage title. imported it to the netherlands and completely rebuild it. For all the exterior lights i installed new assy's and wiring. All was working fine but at the moment the LH rear turn and stop lights do not sequence from inboard to outboard. only the inboard light illuminates. i swopped the harness to the rh side and one time al 3 lights illuminated but after switching of the elec. power and on again only one light illuminats. i have 3 spare harnesses but changing/witching the harnesses does not solve the problem. i meassured the wires all ok. changed the bulbs also OK. in the juncion box installed a new fuse ande also in the box under the hood. is there a sequencing box somewere?