Sequentials (meter4it chase) video

[AmBo]

Looks good. Can you adjust the timing i.e. slow it down just a tad?

sadly, you can't, but it's ok

 

[SRT Handz]

sadly, you can't, but it's ok

accually you can.

See, in the mistake of the shipping you got my meter4it kit and i got your web electronics kit. But i have the Modified flasher and instructions for your meter4it kit because they were shipped correctly to me. In the instructions it tells you how to use the Modified flasher and box to slow down or speed up the sequence using the brake pedal.

....But i used the modified flasher and un-modified it to replace my jacked-up stock one

 

[AmBo]

accually you can.

See, in the mistake of the shipping you got my meter4it kit and i got your web electronics kit. But i have the Modified flasher and instructions for your meter4it kit because they were shipped correctly to me. In the instructions it tells you how to use the Modified flasher and box to slow down or speed up the sequence using the brake pedal.

....But i used the modified flasher and un-modified it to replace my jacked-up stock one

Ok, let's try that one again. So I'm using the wrong flasher?

 

[SRT Handz]

Ok, let's try that one again. So I'm using the wrong flasher?

OK, when you installed you Meter4it kit did you modify you stock flasher or instal the new flasher from the kit?

 

[AmBo]

OK, when you installed you Meter4it kit did you modify you stock flasher or instal the new flasher from the kit?

I installed the new flasher from the kit

 

[SRT Handz]

I installed the new flasher from the kit

ok, then from what i was reading, you can use the button on the controll box and the brake pedal to control the speed and set it

 

[AmBo]

Where do you see that? http://www.meter4it.com/96-04_Mustang_Install.htm

 

[SRT Handz]

Q) Can the speed of the chase sequence be adjusted to slow it down?

A) The speed is based off the flashers speed when calibrated to the left/ right turn signal (recommended in instructions). Another option (if you wanted it to be faster) would be to calibrate it using the brake. If you push the calibrate button and then push the brake peddle "twice" at a rate equal to or faster than the flasher you can make it sequence or chase faster depending on what pattern you have selected.

 

[Kilgore Trout]

Did someone say "flasher"?

 

[mustang90]

with the meter kit you can do anything possible. Just press the brake pedal go back to the box and jump it and you no longer have the 3 lights sequence when you press the brake pedal. I had my car out yesterday and everyone was on my a** cause of that kit. I'm ready to sell this one, LOL. ENJOY!

 

[AmBo]

with the meter kit you can do anything possible. Just press the brake pedal go back to the box and jump it and you no longer have the 3 lights sequence when you press the brake pedal. I had my car out yesterday and everyone was on my a** cause of that kit. I'm ready to sell this one, LOL. ENJOY!

You don't like the kit?

Wait, what do you mean by "jump it"? If I could make the brake lights be solid that would be clutch.

 

[gnat]

with the meter kit you can do anything possible. Just press the brake pedal go back to the box and jump it and you no longer have the 3 lights sequence when you press the brake pedal. I had my car out yesterday and everyone was on my a** cause of that kit. I'm ready to sell this one, LOL. ENJOY!

but for how much?



ambo I've found some cool electronics which look like they may allow me to have up to 7 different styles of lighting, and timing is adjustable too. If I get the parts I'll start a homebrew thread should be fun.