• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Severe Stumble Midway through the rpm range?

  • Thread starter Thread starter leroy93lx
  • Start date Start date Mar 19, 2008

leroy93lx

Member
Jun 24, 2007
29
2
9
Indiana
Mar 19, 2008
#1
  • Mar 19, 2008
  • #1
I test drove a 96 GT over the weekend and right around the 3000-3500 rpm range it fell on its face. Once it got past 3500 it cleared up. The owner said he thought it was because it didnt have mil eliminators. It had a check engine light. It had a UPR x-pipe and a Magnaflow catback. Those were the only mods to the car. Would the lack of mil's cause this or is it more of a iac or maf issue? Im use to 302s and dont have a ton knowledge of the 4.6! Any help would be greatly appreciated
 

40th GT

New Member
Apr 7, 2004
916
0
0
Lawrenceville, GA
Mar 19, 2008
#2
  • Mar 19, 2008
  • #2
It could be a number of things actually, but I doubt it's anything serious.

It probably just needs some new spark plugs, fuel and air filter, Seafoam, a MAF cleaning, and/or the MIL eliminators.

As far as the MIL eliminators, you can make some yourself without much difficulty. According to the write-ups that I've read, all you do is splice in some resistors in the 02 sensor wires.
 

Black_02_GT

Member
Mar 2, 2008
0
0
16
Mississippi
Mar 19, 2008
#3
  • Mar 19, 2008
  • #3
I have the UPR o/r x pipe on mine with a set of flowmasters and mine runs perfect, no MIL eliminators so im sporting the check engine light as well and i have problems
 

TrueBlue03

Member
Dec 9, 2003
372
3
18
Bay Area, CA
Mar 19, 2008
#4
  • Mar 19, 2008
  • #4
40th GT said:
It could be a number of things actually, but I doubt it's anything serious.

It probably just needs some new spark plugs, fuel and air filter, Seafoam, a MAF cleaning, and/or the MIL eliminators.
.
Click to expand...
+1 ....one of these is most likely the problem.

It could be a lot of things. my car needed new plugs, spark plug boots and 1 of the coils was bad causing the exact hesitation problem you are describing. It only bogged during certain rpms, and always during WOT. It is most likely not going to be an IAC problem with the symptoms you're describing.
 

ttop88

Member
Mar 12, 2007
42
0
6
indiana
Mar 19, 2008
#5
  • Mar 19, 2008
  • #5
It could be a dead spot in the tps.
 

leroy93lx

Member
Jun 24, 2007
29
2
9
Indiana
Mar 19, 2008
#6
  • Mar 19, 2008
  • #6
TPS makes sense. I will do a tune up on it just because. I'm confident its something simple. I just wanted to make sure i wasnt getting into bigger issues. Thanks for the input everybody!!
 

40th GT

New Member
Apr 7, 2004
916
0
0
Lawrenceville, GA
Mar 19, 2008
#7
  • Mar 19, 2008
  • #7
no problem.
 
You must log in or register to reply here.

Similar threads

K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
351
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
Throttle cut out at 3500 rpm
  • Piranahbite
  • Jul 8, 2023
  • 2.3L (N/A & Turbo) Tech
Replies
16
Views
4K
2.3L (N/A & Turbo) Tech Nov 9, 2023
AeroCoupe
98 GT PI Swapped Engine Fires, Dies Immediately NOT PATS
  • MMccPerformance
  • Dec 2, 2023
  • SN95 4.6L Mustang Tech
Replies
3
Views
2K
SN95 4.6L Mustang Tech Dec 20, 2023
Yel2002GTAuto
Y
New Gauges...Accurate? Well Made? Safe?
  • Wayne Waldrep
  • Oct 18, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
10K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 19, 2019
jrichker
E
Stumbling And No Power @ 3000 Rpm
  • EightNineVert
  • Aug 4, 2015
  • Fox 5.0 Mustang Tech
Replies
6
Views
6K
Fox 5.0 Mustang Tech May 1, 2016
EightNineVert
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?