Sloppy windows

[FEARED]

Hey Guys,

I have a 93 drop top and the pwr windows work but they are sloppy. Real sloppy. I'm thinking just a bushing or somthing but all four windows need help. Any ideas?

Thanks

 

[criticman]

My hatch has similar issues with both sides...they work, but don't do so smoothly and sound terrible when left cracked and you close the door.

Anyway, let us know someone!

 

[HISSIN50]

front windows or back? the vert windows up front have a couple glide bushings (that i recall) which wear out. resto houses sell them, but they are kind of a pain to install, since the guide track needs some manipulation.

good luck.

 

[FEARED]

front windows or back? the vert windows up front have a couple glide bushings (that i recall) which wear out. resto houses sell them, but they are kind of a pain to install, since the guide track needs some manipulation.

good luck.

Both front and quarters. Not sure what to do about the quarters but I found the track guides you spoke of on 50resto. I attached the link. Hopefully this will do it. I'm tired of the getto windows. Happy I wont have to deal with it when i get my 2000, but I'll miss the ol' pushrod.

Window Bushings

 

[HISSIN50]

yeah, i think those look right (it has been a long time since i looked at it though). i found a U-shaped bushing that fit, so i used it instead (so i would not have to remove the guide dealie). you have taken the inner door panel off to check stuff out, right? sometimes an adjustment and some cleaning/greasing does a lot (the rails have bolts for adjustment).

my rear windows are jacked - i need to tear it all apart. so let me know what you find and how it goes. ill do the same if i do it first. and if you know of new rear window gears and/or brush kits, let me know. i cant find any.

good luck.