• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

SMOG PUMP PIPE ON H-PIPE?

  • Thread starter Thread starter 1990LXstang
  • Start date Start date Aug 2, 2004
1

1990LXstang

Founding Member
Nov 5, 2002
227
0
0
West Haven CT
Aug 2, 2004
#1
  • Aug 2, 2004
  • #1
Can I just yank that think out? Has anyone done this and still run the pump? the pipe is all bent out of shape... what can i do with this thing?
 
M

Mhypertext

New Member
Aug 1, 2004
30
0
0
Joplin MO
Aug 2, 2004
#2
  • Aug 2, 2004
  • #2
Son thats why they put wire in the welder
 

90_Red_LX

Member
Sep 29, 2003
668
5
19
Asheboro, NC
Aug 2, 2004
#3
  • Aug 2, 2004
  • #3
Might have to cut it out. Will make a noticeable noise with pump on though. Bypass the pump, or have a fitting welded in to hook the tube to the pipe.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 3, 2004
#4
  • Aug 3, 2004
  • #4
not the best thing for the cats, if you have them.
 

FiveO

Founding Member
Jan 28, 2001
1,146
0
0
NJ
Aug 3, 2004
#5
  • Aug 3, 2004
  • #5
just buy some heater hose and clamps...cut the old pipe but leave enough to attach 3-4 inches of hose to.
 

88stangmangt

Active Member
Nov 25, 2003
2,332
1
48
Stafford,VA
Aug 3, 2004
#6
  • Aug 3, 2004
  • #6
you can pull it off but it will cause a exhaust leak.
 
F

fivepointohgt

New Member
Dec 30, 2002
86
0
0
YC, California
Aug 3, 2004
#7
  • Aug 3, 2004
  • #7
I believe the only thing it will hurt is your cats (if you have them). The air tube is their to aid the cats. Do a search; there have been a few posts about it.
 

FOOT2DFLOOR

New Member
Jan 12, 2004
108
0
0
Williamston, South Carolina
Aug 3, 2004
#8
  • Aug 3, 2004
  • #8
Cut it off about a inch from where it goes into the exhaust, then take and mash the pipe shut and weld it closed do the same thing to the other end and tie it up with a zip tie, out of clear view.
 
You must log in or register to reply here.

Similar threads

Engine Cleaning Intake valves with lower intake off
  • R82148V
  • Mar 4, 2026
  • Fox 5.0 Mustang Tech
Replies
13
Views
447
Fox 5.0 Mustang Tech Mar 11, 2026
limp
O
Sooty/Oily Front Engine & Pulleys
  • ozenator
  • Jun 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
298
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 22, 2026
Blackhawkxx
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
277
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
931
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
R
electrical plug identification
  • redlineracing1328
  • Jun 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
111
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 12, 2026
keel
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?