S Swhitney Active Member Feb 11, 2019 184 10 28 Oregon City May 11, 2021 #1 May 11, 2021 #1 Anyone know the size of the banjo bolt for a SN95 rear caliper? Striking out at my local auto parts store, and Ford is claiming it's discontinued.
Anyone know the size of the banjo bolt for a SN95 rear caliper? Striking out at my local auto parts store, and Ford is claiming it's discontinued.
Mustang5L5 That is…until I whipped out my Bissell Mod Dude Feb 18, 2001 43,258 17,941 224 Massachusetts May 11, 2021 #2 May 11, 2021 #2 M10 x 1.0 is the most likely size. problem is I also believe 3/8-24 was used on the early calipers. Most of the bleeders and banjos on the rear calipers ive messed with have been M10.
M10 x 1.0 is the most likely size. problem is I also believe 3/8-24 was used on the early calipers. Most of the bleeders and banjos on the rear calipers ive messed with have been M10.
S Swhitney Active Member Feb 11, 2019 184 10 28 Oregon City May 12, 2021 #3 May 12, 2021 #3 Mustang5L5 said: M10 x 1.0 is the most likely size. problem is I also believe 3/8-24 was used on the early calipers. Most of the bleeders and banjos on the rear calipers ive messed with have been M10. Click to expand... Found the correct size. It is an M10x1.0 thread and 27mm length
Mustang5L5 said: M10 x 1.0 is the most likely size. problem is I also believe 3/8-24 was used on the early calipers. Most of the bleeders and banjos on the rear calipers ive messed with have been M10. Click to expand... Found the correct size. It is an M10x1.0 thread and 27mm length